Streszczenie treści zawartej na stronie nr. 1
Colour Television
Colour Television
Owner’s Manual
NLT-26HD1 / NLT-32HD1 /
NLT-37HD1 / NLT-42HD1
Please read this manual carefully before operating your set.
Retain it for future reference.
See the label attached on the back cover and quote this information
to your dealer when you require service.
Streszczenie treści zawartej na stronie nr. 2
AVL (Auto Volume Leveler) Installation 3 SPDIF Format (in digital mode only) Stereo/Dual/NICAM reception Location and function of controls 4-7 Remote control handset Time Menu 30-33 Battery installation Clock Front panel On/Off Time Back panel Auto sleep Time Zone (in digital mode only) Connection to External equipment 8-12 Daylight Saving (in digital mode only) Sleep timer Basic operation 13 On and Off / Programme selection Setup Menu 34 Volume adjustment Audio Mode (in digital mode only) On
Streszczenie treści zawartej na stronie nr. 3
Installation Ω Power Location EN This set operates on an AC mains supply, the voltage is as Position your set so that no bright light or sunlight falls indicated on the label on the back cover. Never apply DC directly onto the screen. Care should be taken not to power to the set. In the event of thunderstorms or powercuts, expose the set to any unnecessary vibration, moisture, please pull out the aerial and mains plugs. dust or heat. Also ensure that the set is placed in a position to allow a f
Streszczenie treści zawartej na stronie nr. 4
? X EXIT INPUT PIP MUTE SSM INPUT VOL CC SW AP PR PR ARC LIST OK i PR- PIP FA V Q.VIEW VOL M PSM MENU PR+ TV/DTV PIP POWER TEXT AF - All the functions can be controlled with the remote control handset. - Some functions can also be adjusted with the buttons on the front panel of the set. - Before you use the remote control handset, please install the batteries. POWER MUTE Switches the set On from standby or Off to Switches the sound on or off. standby. SSM (Sound Status Memory) NUMBER BUTTONS R
Streszczenie treści zawartej na stronie nr. 5
Location and function of controls Battery installation - Your remote control handset is powered by two AAA type batteries. EN 1 2 3 1 2 3 To insert batteries, turn the remote Put the two batteries into the Replace the cover. control handset over and remove the compartment observing battery battery cover. polarity. To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period time. Do not use batteries of differing
Streszczenie treści zawartej na stronie nr. 6
- Shown is a simplified representation of the set. - Here shown may be somewhat different from your set. ON/OFF 4 5 6 7 8 1 2 3 1. MAIN POWER (ON/OFF) 5. INPUT SELECT Switches the set On or Off. Select DTV, TV, AV1, AV2, S-VIDEO, COMPONENT, PC-RGB, HDMI mode. 2. (Programme Up/Down) D / E Selects a channel or a menu item. 6. POWER (r r) Switches the set On from standby. Switches the set On from standby or On to standby. 3. F / G (Volume Down/Up) 7. POWER/STANDBY INDICATOR (r r) Adjusts the volume
Streszczenie treści zawartej na stronie nr. 7
Location and function of controls Back panel EN 3 1 2 4 5 6 7 8 1. HDMI INPUT / RGB INPUT / AUDIO INPUT SOCKETS 6. Antenna INPUT Connect the set output socket of the PERSONAL COMPUTER to this socket. 7. Digital Audio (OPTICAL) Connect digital audio from various types of equipment. 2. AUDIO INPUT / COMPONENT INPUT (480i / 576i / Note : In standby mode, these ports will not work. 480p / 576p / 720p / 1080i) SOCKETS (HDMI & DTV input) 3. AUDIO/VIDEO SOCKET 8. POWER CORD SOCKET Connect the audio/vid
Streszczenie treści zawartej na stronie nr. 8
- You can connect additional equipment, such as VCRs, camcorders etc. to your set. However please check with your manufacturers instruction books for specific information. Make sure all connections are made with both your set and additional appliance unplugged from the mains to avoid damaging your equipment. Here shown may be somewhat different from your set. 1 2 1 2 Antenna Connection Watching VCR - Be careful for the bronze wire not to be bender in < Back panel of the set > connecting to ante
Streszczenie treści zawartej na stronie nr. 9
Connection to External equipment EN 3 4 3 4 Watching Cable TV Watching external AV source < Back panel of the set > 1 < Back panel of the set > Camcorder AUDIO VIDEO For cable TV RL 2 (R) AUDIO (L) VIDEO (R) AUDIO (L) VIDEO < Back panel of the external Video game set TV TV equipment > VCR VCR RF Cable RF Cable < Cable Box > - After subscribing for a local cable TV station and installing a When connecting the set to an external source, converter you can watch cable TV. match the colours of AUDIO
Streszczenie treści zawartej na stronie nr. 10
5 5 Watching DVD < Back panel of the set > or (R) AUDIO (L) B R (R) AUDIO (L) S-VIDEO < Back panel of a DVD player > How to connect Connect DVD video inputs to Y, Pb, Pr of COMPONENT (DVD INPUT) and audio inputs to Audio sockets of AUDIO INPUT. How to use Turn on the DVD player, and insert a DVD. Use INPUT SELECT button on the remote control to select Component. Refer to the DVD player's manual for operating instructions. Component ports of the PR • Component Input ports Y PB set You can get be
Streszczenie treści zawartej na stronie nr. 11
Connection to External equipment EN 6 6 Connecting HDMI < Back panel of the set > HDMI OUTPUT HDMI OUTPUT (R) (R) AUDIO (L) AUDIO (L) < DVI signal input only> Connect the signal cable from the monitor output socket of HDMI Interface with HDCP Copy Protection enables the PERSONAL COMPUTER to the HDMI INPUT socket all-digital rendering of video without the losses. of the set. This TV SET can receive the High-Definition Multimedia Connect the audio cable from the PC to the AUDIO INPUT Interface(HD
Streszczenie treści zawartej na stronie nr. 12
8 8 7 7 Connecting Digital Audio Connecting PC (HDMI & DTV input) < Back panel of the set > < Back panel of the set > RGB OUTPUT RGB OUTPUT (R) (R) AUDIO (L) AUDIO (L) or Connect the signal cable from the monitor output socket of the - Send the set’s audio to external audio equipment PERSONAL COMPUTER to the RGB INPUT socket of the (stereo system) via the Digital Audio Output (Optical) set. Caution : Do not look into the optical output port. Looking at the laser beam may damage your vision. C
Streszczenie treści zawartej na stronie nr. 13
Basic operation EN 1 2 4 1 2 4 On and Off Programme selection On screen language selection (option) Press the main power button to You can select a programme number Press the MENU button and then use switch the set on. with the or NUMBER buttons. D E button to select the SETUP D / E / menu. If the set is in standby mode, press the POWER, D E buttons on the Press the G button and then use D E / / remote control handset to switch it button to select Language. on fully. 3 3 Press the G button
Streszczenie treści zawartej na stronie nr. 14
- The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. 1 2 1 2 Press the MENU button and then use Press the G button to display the sub menu or the pull-down menu. D / E button to display each menu. Change the setting of an item in the sub or pull-down menu with F / G or . Press the G button and then use D / E D / E button to select a menu item. You can move to the higher level menu with F button and t
Streszczenie treści zawartej na stronie nr. 15
Setting up TV stations Auto programme tuning - Stations can be tuned using automatic or manual modes. - All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. EN 1 2 3 1 2 3 Press the MENU Press the G button and then use button Press the button to select Search. D / E D / E button and then use to select Auto. button to Press the G button to begin auto programming. D / E select the STATION Press the G button to
Streszczenie treści zawartej na stronie nr. 16
- Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. 1 2 3 1 2 3 Press the MENU Press the G button and then use Press the button to select System. D / E D / E button and then use button to select Manual. button to Select a TV system with the F / G button on the D / E select the STATION Press the G button to display the System pull-down menu; menu. Manual menu. M : NTS
Streszczenie treści zawartej na stronie nr. 17
Setting up TV stations Manual programme tuning (in analogue mode only) EN 4 5 4 5 Normally fine tuning is only necessary if Press the button to select Name. D / E reception is poor. Press the G button on the Name pull-down menu. Press the D E button to select Fine. / Press the button. You can use a blank, +, -, the numeric 0 to 9 and the D alphabet A to Z. Press the F / G button to fine tune for With the button you can select in the opposite direction. E the best picture and sound. Select t
Streszczenie treści zawartej na stronie nr. 18
- This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1 2 4 1 2 4 Press the MENU button and Deleting a programme Moving a programme then use button to D / E Select a programme to be deleted with the Select a programme to be moved with select the STATION menu. or F / G button. the or F / G button. D / E D / E Press the G button and then Press the RED butt
Streszczenie treści zawartej na stronie nr. 19
Setting up TV stations Programme edit Calling the programme table (in analogue mode only) - You can check the programmes stored in the memory by displaying the programme table. EN 5 1 5 1 Skipping a programme number Displaying programme table Select a programme number to be Press the LIST button to display the Programme table menu. skipped with the or F / G button. The programme table appears on the screen. D / E One programme table contains ten programmes as below. Press the BLUE button. Th
Streszczenie treści zawartej na stronie nr. 20
1 1 Press the MENU button and then use button to Press the G button and then use button to select D / E D / E select the STATION menu. Channel list. Press the G button and then use button to select Press the G button to display the Channel list menu. D / E DTV Info. Repeatedly press the MENU button to return to normal DTV viewing. STATION STATION CHANNEL LIST Auto Auto Channel list Channel list Ch.3 SBS DIGITAL 1 Manual Manual TV Guide Ch.7 Ch.7 7 Digital 7 Digital DTV Info DTV Info DTV Info D
