Streszczenie treści zawartej na stronie nr. 1
68cm
Colour Television
y y e e a a r r
2 2
MPF68A & MTV68A
USE & CARE GUIDE FOR BOTH MODELS
Streszczenie treści zawartej na stronie nr. 2
• Do not abuse the supply cord. Never carry the TV by Safeguards & Safety the supply cord. Never yank the supply cord from the power outlet; instead, grasp the plug and pull to Thank you very much for your purchase of this product. disconnect. Keep the supply cord away from heated To enjoy your set to the full from the very beginning, surfaces. read this manual carefully and keep it handy for ready • Do not operate the TV with a damaged supply cord or reference. plug or after the TV malfun
Streszczenie treści zawartej na stronie nr. 3
Ventilation Product Features There should be at least 10cm space between the top, rear and sides of the TV. Installation Locate the receiver in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Do not install the TV in a location near heat sources such as radiator, air ducts, direct sunlight, or in a closed compartment and or area. Compulsory Wa
Streszczenie treści zawartej na stronie nr. 4
Contents Please read this user manual before using your MTV68A or MPF68A. By following the instructions and operating hints, you will ensure top performance for many years. Keep this manual in a safe place. Safeguards & Safety ....................................................................................................................................................................... 2 Product Features ...................................................................................
Streszczenie treści zawartej na stronie nr. 5
Quick Start Note: For connection of Television directly to Wall socket or indoor antenna only. 1. Carefully unpack your Magnavox television, ensuring 3. the following items are present:- • Instruction Booklet • Remote Control • 75Ohm Antenna Lead • 2 x AA size batteries for Remote Control 2. Read through the instruction booklet and familiarise yourself with the operation of the product. 3. Connect the antenna lead to the aerial terminal located on the back panel of the television set and
Streszczenie treści zawartej na stronie nr. 6
Knowing Your Television Set Front Controls for MTV68A Vi VIDEO 2 Ri AUDIO-2 RIGHT Li AUDIO-2 LEFT SIDE AV INPUT Remote control sensor: If remote control unit within an effective operating range, the unit can be operated. Remote indicator light: When the unit is on, the indicator is lighted. Power button: To turn unit on, press the button and the indicator will light up. Press the button again, the unit is off. MENU TV/AV V- V+ P- P+ • Channel up “+” and down “-” • Volume up “+” and down “-” •
Streszczenie treści zawartej na stronie nr. 7
Front Controls for MPF68A Vi VIDEO 2 Vi VIDEO 2 Ri AUDIO-2 RIGHT Ri AUDIO-2 RIGHT Li AUDIO-2 LEFT Li AUDIO-2 LEFT SIDE AV INPUT SIDE AV INPUT Remote control sensor: If remote control unit within an effective operating Power button: To turn unit on, press the button and the indicator will range, the unit can be operated. light up. Press the button again, the unit is off. Remote indicator light: When the unit is on, the indicator is lighted. Remote control sensor: If remote control unit within a
Streszczenie treści zawartej na stronie nr. 8
Remote Control Handset Infrared LED Standby - to switch the TV off, to Standby mode or on last TV/AV - to select the viewed position signal source Game Direct Access Tuning Zoom Call - to call up information display Mute - to mute sound or cancel mute Digit - to select the digit of the position number Quick View Picture Effect Scan Lock Menu 2 Picture Menu Sleep - to set the Sleep Timer Channel Up/Down Menu 1 Volume Up/Down 8
Streszczenie treści zawartej na stronie nr. 9
To Prepare Remote Control Handset Notes about using handset: Battery Installation 1. When the handset will not be used for a long period of The remote control unit uses two AA batteries. For battery time or when the batteries are discharged, remove the installation and replacement, read the following. batteries to prevent leakage. 1. Turn the remote control unit upside down. Press down 2. Do not drop, dampen or disassemble the remote. on the grip of the battery compartment and slide the c
Streszczenie treści zawartej na stronie nr. 10
Tuning Procedure MENU 1 - A. Press [MENU 1] key continuously, menu screen will appear as follows: B. Press [P+] [P-] key, cursor up or down. Press [V+] [V-] key, change value for selection . Note: Tint only for NTSC system. Auto Search Function Automatic Search and Memory (ASM) for program installation from Antenna input. The TV will search through the whole channel coverage and store all programs being transmitted, in sequential order. A. Press [MENU 1] key repeatedly to select “PRESET”
Streszczenie treści zawartej na stronie nr. 11
Tuning Procedure Fine FUNCTION: Fine Tuning for current setting. May be used to tune weak stations. A. Press [MENU 1] key repeatedly to select “PRESET”. B. Using [P+] or [P-] key, select “PROGRAM.”. Using [V+] or [V-] change Program Number. C. Using [P+] or [P-] key, select “FINE TUNE”. D. Using [V+] or [V-] key, adjust for best tuning. Skip FUNCTION: Use to “SKIP” Channels. After setting to “ON”, the channel will not be selected by Channel Up/Down keys. For example, if you decide to turn “
Streszczenie treści zawartej na stronie nr. 12
Normal Operation 1. Power ON /OFF Firstly, the power supply of the unit must be switched at the power switch on the television set. This status is called Stand-By mode. While in standby mode, the TV can be turned on/off via the remote control by pressing the ON/ OFF button or alternatively the [P+]/[P-] keys on the TV set. 2. Channel Up/Down Press [P+] key, to change Channel Up Press [P-] key, to change Channel Down. 3. Direct Access Tuning Using the numeric keys on the remote control, chan
Streszczenie treści zawartej na stronie nr. 13
Normal Operation 5. Mute By pressing this key, sound output will be muted. Press [MUTE] again, or [V+]/[V-], sound Volume will return. 6. TV/AV You can select your video source by pressing on [TV/AV] key. For example, to watch a DVD or video, you will need to be in AV mode after the DVD player or video player is connected and set up. AV1 - signal comes from the rear inputs AV2 - signal comes from the side inputs S-VHS - signal will appear when an S-Video cable is being used in conjunction w
Streszczenie treści zawartej na stronie nr. 14
Normal Operation 10. Sleep Press [SLEEP] repeatedly. Sleep time will count up as follows: • To exit sleep mode, continue pressing SLEEP until “--” appears. • To set sleep mode, select time. The TV will go into standby mode after the time selected has lapsed. 11. Picture Effect By repeatedly pressing this key, picture effects will change as follows: : TINT setting is not included unless NTSC signal received. : PERSONAL is the last setting made by you. 12. Zoom - changes the way your pict
Streszczenie treści zawartej na stronie nr. 15
Normal Operation 13. MENU 2 Press [MENU 2] key, “MENU 2” will appear. Press the key again, “MENU 2” will disappear. Use the [P+]/[P-] keys to select from the following: PIC.ENHANCE / SWAP PROG / BIO RHYTHM / CALENDAR. Using [V+]/[V-] key enter item. 13.1. Pic Enhance Using [P+]/[P-] key select the item, Using [V+]/[V-] key change on or off. Using [MENU 2] key exit. FAV. COLOUR will change as follows: 13.2. Swap Prog A. Using [P+]/[P-] key select: “PROGRAM A” or “PROGRAM B”. B. Using [V+]/[
Streszczenie treści zawartej na stronie nr. 16
Normal Operation 14. Lock A. By pressing the key, “LOCK MENU” will appear. B. Input code and may be selected other item. If “GENERAL LOCK” is on, other items will be effected. C. Using [P+] or [P-] key, select “PROGRAM”. D Using [V+] or [V-] to change Program Number. E. When “CHILD LOCK” is set ON, the picture will disappear. It will show ‘PRESET”,”SETUP’ back display. This is the background you have set up previously. At this time, the channel is locked. F. When you wish to change password
Streszczenie treści zawartej na stronie nr. 17
Menu Operation Picture Menu Function: Brightness, Contrast, Colour Sharpness, Tint. A. Press [MENU] key on TV set or press [MENU 1] key on remote control, MENU appears on screen. Select “PICTURE”. B. Select each function using the [P+]/[P-] keys. C. Each value can be controlled by the [V+]/[V-] keys. D. Repeat any functions if required. Note: TINT control will be appeared only if a NTSC signal is being received. Setup NB: altering the blue back will change settings on all positions. A. Pr
Streszczenie treści zawartej na stronie nr. 18
Menu Operation Clock Function Time and Timer setting. A. Press [MENU] key on front or press [MENU 1] key on remote control, MENU appears on screen. Select “CLOCK”. B. TIME (TIME, TIMER, OFF-TIME, ON-TIME) setting: Using the [V -] key, hours will increase from “0, 1... 23,24”. Using the [V+] key, minutes will increase from “00” to “59”. C. TIME: Using the [V+][V -] key, will change “TIME”. D. TIMER - Generally, if “ON-TIME” or “ OFF-TIME” is not set, “TIMER” will not be set. In order to ac
Streszczenie treści zawartej na stronie nr. 19
Troubleshooting Before calling the service personnel, please check the list below to fix some simple problems not caused by the unit itself. Symptom To be checked No picture. No sound. Be sure the power cord is plugged in. Normal picture. No sound. The sound volume is adjusted to the lowest level. Poor colour, contrast, tint May need to adjust the contrast, colour and tint. Spots on screen May be pulse interference from nearby cars, motorcycles, electric trains, high tension lines, neon signs, h
Streszczenie treści zawartej na stronie nr. 20
Technical Data Rated voltage: AC 230-240V, 50Hz Power consumption: 138-150W Sound output: 4W x 2 Dimensions: 780mm (w) x 580mm (h) x 570mm (d) Mass: 35kg approx. System: Colour sound RF PAL 5.5MHz AV NTSC 3.58/4.43 PAL4.43 Channel coverage: CATV 470MHz *Design and specifications are subject to change without notice. 20
