Streszczenie treści zawartej na stronie nr. 1
COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
Knowing your TV’s features ....................................................... 3
AV-29LS24 AV-21CS24
Remote control buttons and basic functions .............................. 4
AV-29LX14 AV-21CX14
TV buttons and functions ........................................................... 6
AV-29VS24 AV-21DX14
Setting up your TV ..................................................................... 7
Basic setting for picture..
Streszczenie treści zawartej na stronie nr. 2
Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT 7 If you are not going to use this TV for a long period of time, be sure to EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. disconnect the AC plug from the AC socket. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE 8 The apparatus shall not be exposed to dripping or splashing and that FOLLOWING RULES
Streszczenie treści zawartej na stronie nr. 3
6 6 1 2 3 4 5 Knowing your TV’s features Main features PIP (Picture in Picture) You can view two different sources (e.g. TV programme and VCR sources) at the same time. 4 TELETEXT You can view teletext programmes which are broadcasted by some TV channels. Teletext programme is an information in text form. A2/NICAM You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2 (STEREO / I II) or NICAM Sound-multiplex system. 5 FAVORITE CH (Channel) You can register u
Streszczenie treści zawartej na stronie nr. 4
1 2 3 4 5 6 7 8 9 Remote control buttons and basic functions No. Press To POWER Turn on or off the TV from standby mode. 1 MENU/OK Display menu and confirm selected function. 5 / ∞ / 2 / 3 Select and adjust menu function. CHANNEL -/+ Select the desired channel number. 8 6 VOLUME -/+ Adjust the volume level. 3 TV/VIDEO Select TV or video terminal input. 2 7 MUTING Turn off the volume. Press this button again to resume the volume. DISPLAY Display the programme number or video terminal number, st
Streszczenie treści zawartej na stronie nr. 5
3 8 2 2 8 3 3 3 3 3 3 2 3 3 2 2 2 Remote control buttons and basic functions (continued) How to operate menus and menus locations Top menu 2nd menu Location 3rd menu Location MENU INPUT EXT. INPUT P.18 – – To Operation Note DISPLAY P.18 – – Display the MENU Press the MENU/OK button . To exit the MENU, PICTURE PICTURE MODE P.9 – – press the DISPLAY *If you want to PICTURE SETTING P.10 – – button or choose adjust PICTURE WHITE BALANCE P.10 – – EXIT menu. SETTING menu, PICTURE – VNR P.17 Display t
Streszczenie treści zawartej na stronie nr. 6
1 2 3 4 5 6 7 8 9 CHANNEL VOLUME V L / MONO R IN (VIDEO-2) TV buttons and functions The illustrations shown below is for AV-29VS24 and AV-21CS24 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. No. Button/terminal Description Page L (main power) Press to turn on or turn off the TV’s main power. – Front of the TV POWER lamp Indicate the TV is being turned on or off. – AV-29VS24 No colour : TV’s main power is being turned off. !9 8765 4
Streszczenie treści zawartej na stronie nr. 7
Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial cable. 2 Connecting the compatible main plug to the AC outlet. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) If you connect a VCR, connect the aerial output jack of your VCR 3 Inserting batteries into the remote control. and the aerial jack on the TV with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of the TV Insert two batteries
Streszczenie treści zawartej na stronie nr. 8
Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing any button except POWER button, then operate the TV menu by following the steps as below: LANGUAGE TEXT LANGUAGE AUTO PROGRAM AUTO PROGRAM EDIT ENGLISH GROUP–1 PR CH/CC SETUP TOUR RESTART? 7 CH 09 êìëëäàâ GROUP–2 CH 12 8 CH 11 GROUP–3 22% 9 CH 13 3 OK RESTART 10 GROUP–4 FRANÇAIS NO 11 12 BACK 13 OK BACK BACK INSERT OK OK OK MOVE DELETE MANUAL • Press 5/∞ butto
Streszczenie treści zawartej na stronie nr. 9
Basic setting for picture COLOUR SYSTEM PICTURE MODE You can select the appropriate colour system when the picture is You can choose the desired picture setting with one-touch. not clear or no colour appears. Press the PICTURE MODE button to select a setting. Press the COLOUR SYSTEM button to select a setting. SOFT Softens contrast and sharpness. BRIGHT Heightens contrast and sharpness. AUTO PAL SECAM NTSC3.58 STANDARD Standard picture setting. USER You can change this picture
Streszczenie treści zawartej na stronie nr. 10
Basic setting for picture (continued) Adjusting the picture – USER WHITE BALANCE You can adjust the desired picture setting when selecting USER You can change the white balance of the picture to better match in PICTURE MODE. the type of video being viewed. Select the WHITE BALANCE in the PICTURE menu, then choose 1 Select the USER in PICTURE MODE under PICTURE menu. ❇ the desired setting. PICTURE menu MENU PICTURE MODE ❇ USER MENU PICTURE menu WHITE BALANCE 2 Select the PICTURE SETTING in PICTUR
Streszczenie treści zawartej na stronie nr. 11
Advanced setting for picture 2 Press the 5/∞ buttons until the picture become level. Then AI ECO SENSOR (ECO) press the MENU/OK button. You can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. COMPRESS (16:9) 1 Mild contrast (recommended). 2 Even contrast. You can convert a normal picture (4:3 aspect ratio) into a wide OFF Cancel the function. picture (16:9 aspect ratio). To operate this function with a menu: Select the COMPRESS
Streszczenie treści zawartej na stronie nr. 12
Original features for picture When VIDEO-2 is set to component, if the input source of main PIP picture is set to VIDEO-2 with component, PIP button is disabled You can display a sub picture on the screen. and sub picture can’t be displayed. Press the PIP operation buttons to display and change the sub picture setting. TELETEXT PIP Display the sub picture. You can watch the Teletext broadcast channel with TEXT function. To cancel, press the PIP button again. Notes: 1 Press the TEXT button to sel
Streszczenie treści zawartej na stronie nr. 13
Original features for picture (continued) Using the List mode TEXT LANGUAGE You can store and recall the favorite teletext pages in memory You can set the Teletext language group that corresponds to the using the colour buttons. programmes. 1 In TEXT mode, press the MODE button to enter the List mode. Select TEXT LANGUAGE in the INSTALL menu, then choose the 2 Press a colour button, then press the number buttons to enter desired language group. the page number. ❇ MENU INSTALL menu TEXT LANGUAGE
Streszczenie treści zawartej na stronie nr. 14
Basic setting for sound SOUND SYSTEM SOUND MODE You can select an appropriate sound system when abnormal You can choose the desired sound setting. sound occurs even when the picture appears normally. Select the SOUND MODE in SOUND menu, then choose the Press the SOUND SYSTEM button to select a setting. setting. ❇ B/G I D/K M MENU SOUND menu SOUND MODE USER You can change this sound setting as you like. This function is not available in video mode. Select USER and adjust the fre
Streszczenie treści zawartej na stronie nr. 15
Advanced setting for sound CINEMA SURROUND EQUALIZER You can enjoy an enhanced sound for wider audience. You can adjust the sound frequencies when selecting USER Press the CINEMA SURROUND button to select a setting. mode in SOUND MODE. OFF Cancel the function. 1 Select the USER in SOUND MODE under SOUND menu. ❇ LOW Listen to sound with less wider audience effect. SOUND menu MENU SOUND MODE USER HIGH Listen to sound with more wider audience effect. 2 Select the EQUALIZER in SOUND menu. MONO Liste
Streszczenie treści zawartej na stronie nr. 16
Favorite channel and video setting To register the favorite channel 4 Select the desired item that you wish to adjust. CONTRAST BRIGHT SHARP COLOUR You can register and recall 4 favorite channels by using the colour buttons (red, green, yellow, blue). SOUND MODE (USER, DYNAMIC, MUSIC, NEWS) TINT 1 In TV mode, select a TV channel (PR01-99) you desired to register. 5 Press the MENU/OK button to exit the menu. 2 Press and hold a colour button for 3 seconds or more. To adjust the v
Streszczenie treści zawartej na stronie nr. 17
Customized setting VNR CHILD LOCK You can reduce the noise. You can disable the front control buttons of the TV. Select the VNR in the PICTURE FEATURES menu under Select the CHILD LOCK in the FEATURES menu, then choose PICTURE menu, then choose a setting of VNR function. ON or OFF. ❇ ❇ PICTURE menu FEATURES menu MENU PICTURE FEATURES menu MENU CHILD LOCK VNR OFF TIMER OFF VNR is turned off. You can set the TV to turn off automatically to standby mode after AUTO Effect of VNR is automatically con
Streszczenie treści zawartej na stronie nr. 18
Customized setting (continued) AUTO SHUTOFF VIDEO-2 SETTING You can set the TV to turn off automatically when no signal is You can set the VIDEO-2 SETTING according to the video signal received for about 15 minutes or longer after the end of a output from the external devices connected to the VIDEO-2 broadcast. terminal. Select AUTO SHUTOFF in INSTALL menu, then choose ON or Select the VIDEO-2 SETTING in INSTALL menu, then choose a OFF. setting. ❇ ❇ MENU INSTALL menu AUTO SHUTOFF MENU INSTALL me
Streszczenie treści zawartej na stronie nr. 19
TV channel presetting 2 Choose EDIT/MANUAL, then press the MENU/OK button. To register the TV channels automatically EDIT menu appears. You can register the TV channels into the TV’s channel list EDIT automatically. PR CH/CC 1 Display the INSTALL menu. 7 CH 09 8 CH 11 ❇ INSTALL menu MENU 9 CH 13 3 10 11 2 Choose AUTO PROGRAM, then press the MENU/OK button. 12 13 AUTO PROGRAM function starts, and the channels received BACK INSERT are registered in the channel list (PR L
Streszczenie treści zawartej na stronie nr. 20
TV channel presetting (continued) To edit the channel list (PR LIST) To add in the new channel (MOVE and DELETE in the EDIT menu) (INSERT in the EDIT menu) You can edit the TV channel list as you like. You can add in the new channel in the TV channel list as you like. Note: After this operation, other channel’s PR numbers will be You need to find the “CH/CC” number for the TV channel. Find the changed. “CH/CC” number corresponding to the channel number of the TV channel from the attached sheet “
