Streszczenie treści zawartej na stronie nr. 1
Color Television
AVT1345
Streszczenie treści zawartej na stronie nr. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE REFER SERVICICING TO QUALIFIED PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equil
Streszczenie treści zawartej na stronie nr. 3
Audiovox Specialized Applications, LLC 23319 Cooper Dr. Elkhart, IN 46514 1-800-688-3135 Dear Customer, Audiovox Corporation would like to thank you for choosing this color television receiver. It incorporates a host of features designed to give you excellent performance for many years to come. We realize that you’ re eager to turn it on and begin enjoying the high quality pictures it delivers just as quickly as possible, but we ask you to take a few minutes to read the instructions in this boo
Streszczenie treści zawartej na stronie nr. 4
Streszczenie treści zawartej na stronie nr. 5
Important Safeguards PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1. Read all of these instructions. 7. Slots and openings in the cabinet and the back 2. Save these instructions for later use. or bottom are provided for ventilation and to 3. Unplug this television equipment from the ensure reliable operation of the television wall outlet before cleaning. Do not use
Streszczenie treści zawartej na stronie nr. 6
13. An outside antenna system should not be 18. When replacement parts are required, be sure located in the vicinity of overhead power lines or the service technician has used replacement other electric light or power circuits, where it can parts specified by the manufacturer that have fall into such power lines or circuits. When the same characteristics as the original part. installing an outside antenna system. Extreme Unauthorized substitutions may result in fire, care should be taken to ke
Streszczenie treści zawartej na stronie nr. 7
1 Overview of your Equipment Your TV comes with a remote control. The section below summarizes the buttons, controls and terminals that you will use with your TV. Your TV’ s Front Panel 1. POWER Use this button to turn your TV on or off. 2. ù CH ü Use these buttons to change channels on your TV, or to select items in the menu system. 3. ÿ VOL ÷ Use these buttons to change your TV’ s volume, or to select items in the menu system, or to change audio and video settings. 4. MENU Use thi
Streszczenie treści zawartej na stronie nr. 8
Your Remote Control 1. POWER Use this button to turn your TV on or off. 2. MUTE Use this to turn the TV’ s sound on and off 3. ù CH ü Use these buttons to change channels on your TV, or to select items in the menu system. 4. ÿ VOL ÷ Use these buttons to change your TV’ s volume, to activate selections in the menu system, or to change audio and video settings. 5. MENU Use this button to turn the TV’ s menu system on and off. 6. DISPLAY Use this button to display the channel number and status. 7.
Streszczenie treści zawartej na stronie nr. 9
Installing your Remote Control Batteries 1. Open the battery compartment on the back of the remote control. 2. Install the two AAA- size batteries (not included) as shown. Make sure the “+” and “-“ terminals are oriented correctly. Replace the cover. Notes Do not mix different types of batteries, or mix an old and a new battery. Remove and replace weak batteries. Weak batteries can leak and damage your controller. Dispose of batteries properly: never throw them into a fire. Point your re
Streszczenie treści zawartej na stronie nr. 10
2 Connecting an Antenna or cable to Your TV Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below to make this connection. Please note that you will normally only have to make one of the connections shown below, not all of them. All connections will be made to the antenna terminal on the back of your TV. The antenna terminal is a silver metal post partially surrounded by two plastic tabs. For help in locating
Streszczenie treści zawartej na stronie nr. 11
Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one for UHF signals. If your antenna system has both a coaxial lead and twin 300W leads, you must obtain a combiner (available at your local electronics store). Press or screw the coaxial lead onto the combiner; place the twin leads underneath the screws on the combiner and tighten the screws. Press the cable from the combiner onto the antenna termni
Streszczenie treści zawartej na stronie nr. 12
If your cable system requires you to use a converter box for all channels, connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the converter box and the out terminal on your TV. You will need to keep your TV tuned to channel 3 or 4 and change channels using your converter box. If your cable system only requires you to use a converter box for some channels (i.e. pay-TV channels), follow these steps: find the primary incoming coax
Streszczenie treści zawartej na stronie nr. 13
Streszczenie treści zawartej na stronie nr. 14
Changing Channels 1. The ù CH ü buttons will take you through all memorized channels, one by one. The ù CH ü buttons will not access channels that have not been programmed into the TV’ s memory. See the section, “Programming Your TV's Channel Memory" on the previous page. 2. The number buttons (0-9) will take you to any channel, even if it has not been memorized. To change to a channel enter it’ s number: the TV will tune to the new channel when you enter the second dig
Streszczenie treści zawartej na stronie nr. 15
Changing the TV’ s Channel Memory Your TV’ s channel determines the channels that are available using the ù CH ü buttons. You can add channels to this memory or remove them from memory. If a channel is removed from memory you can tune to it with the ù CH ü buttons. If there is just one channel memorized, then the Add/Delete Channels function will search the whole channels. But if there are two or more channels memorized, then the Add/Delete Channels function will search the memorized channels
Streszczenie treści zawartej na stronie nr. 16
Adjusting Video Settings You may wish to adjust the video settings (e.g. contrast or color) to obtain the most pleasing picture. To do so, follow these directions: 1. With the TV on, press the MENU button, then the “video” menu will appear. 2. The “settings” item will be selected. Use the ÿ VOL ÷ buttons to turn Settings to Preset or Custom. 3. Use the ù CH ü buttons to select the video settings you wish to adjust. Descriptions of the video settings are on the next page. 4. Use the ÿ VOL ÷ b
Streszczenie treści zawartej na stronie nr. 17
Returning to the Factory Settings If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps: 1. With the TV on, press the MENU button, then “Video” menu will appear. 2. Press the ÿ VOL ÷ buttons to set the “Settings” to “Preset”. The TV will remember the “Custom” settings you had previously chosen. When you set “Settings” to “Custom” again, your previous custom settings will be restored. Descriptions of Video settings The contrast set
Streszczenie treści zawartej na stronie nr. 18
Streszczenie treści zawartej na stronie nr. 19
Setting the Off Timer If you enter a time in the “Off time” setting, your TV will automatically turn off at that time. Follow these instructions to set the “Off time”. 1. With the TV turned on, press the MENU button until “Time” menu is displayed. 2. Use the ù CH ü buttons to select “Off time” item. 3. If you hold down either ÿ VOL or VOL ÷ button, the corresponding numbers will change more quickly. 4. When the setting is correct, use the ù CH ü buttons to select another “Time” function: or pres
Streszczenie treści zawartej na stronie nr. 20
Setting the Sleep Timer The sleep timer allows you to set the amount of time from 15 minutes to 120 minutes. TV will count down the amount of time you set, then turn itself off. To set the sleep timer: 1. With the TV turned on, press the MENU button until “Time” menu is displayed. 2. Use the ù CH ü buttons to select “Sleep timer” item. 3. Use the ÿ VOL ÷ buttons to set the sleep time. Each time you press VOL, you step between the available sleep times: 15 min., 30 min., 45 min., 90 min., or 12
