Streszczenie treści zawartej na stronie nr. 16
WARRANTY This product is covered by a 12 month warranty against defective workmanship or parts. The warranty does not extend to damage caused by misuse, negligence, water ingress, excessive voltage, telephone line faults or lightning. This guarantee in no way affects your statutory rights. Full details of the warranty are contained in the enclosed warranty card. If you feel this product is not working correctly please consult the user guide and ensure that you are using the produ
Streszczenie treści zawartej na stronie nr. 1
Oricom BB200
DECT Cordless Telephone
User Guide
Keep this user guide for future reference
Streszczenie treści zawartej na stronie nr. 2
CONTENTS Getting Started…………………………………………………………………………. 3 Handset and base unit………………………………………………………………… 3 Handset Display Guide………………………………………………………………... 4 Safety Information……………………………………………………………………… 5 Installation…………………………………………………………………………….... 6 Power supply…………………………………………………………………………… 6 Fitting batteries…………………………………………………………………………. 6 Recharging your cordless phone……………………………………………………… 6 Replacing batteries…………………………………………………………………….. 6 Basic Operation……………………………
Streszczenie treści zawartej na stronie nr. 3
GETTING STARTED Unpacking your Oricom BB200 Retain all packing materials in a safe place, in case you later need to transport it or return it for servicing. In the box, you will find: - 1 cordless handset, 1 Base Unit , 2 AAA rechargeable 600mAh batteries, 1 AC adaptor, telephone line cord and adaptor plug, warranty card and this user manual. Handset and Base unit 1 2 3 4 5 6 7 8 9 10 11 1. Memory button 6. Mute/Delete button 2. Back and Recall butto
Streszczenie treści zawartej na stronie nr. 4
HANDSET DISPLAY GUIDE Legend Memory/Store (to store a number in memory or to make a & call to a stored number) Battery level Battery level (Battery low) Handset Ringer “ON” % Handset Ringer “OFF” % Speakerphone “ON” X Keypad locked On steady: telephone line is busy. Flashing: incoming call The “X” appears when the microphone is muted x On steadily: all new Caller ID records have been listened to but not yet deleted Flashing: new Caller ID records presen
Streszczenie treści zawartej na stronie nr. 5
SAFETY INFORMATION • Avoid exposure of this telephone to moisture or liquid. • To prevent electric shock, do not open the handset or base cabinet. • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors. • Do not use the handset in an explosive hazard area such as where there is gas leaking. • There is a chance that the telephone could be damaged by an electrical storm. It is recommended that users unplug the phone from the mains suppl
Streszczenie treści zawartej na stronie nr. 6
INSTALLATION POWER SUPPLY IMPORTANT! The mains power adaptor must be installed near the equipment and must be easily accessible. Power must be turned on at all times for the phone to work 1. Connect the output plug of the mains adaptor to the adaptor socket on the back of the base unit and the mains adaptor to the wall mains supply. 2. Connect the telephone lead to the phone cord socket on the back of the base unit and to the wall phone socket. FITTING BATTERIES IMPORTAN
Streszczenie treści zawartej na stronie nr. 7
BASIC OPERATION Introduction When the phone is in standby mode, the LCD displays the handset name. The battery icon reflects the current battery level and the signal icon indicates the handset is linked to the base. TO ANSWER A CALL • When you receive a call, both handset and base will ring, the symbol appears on the display, and both the red led on the handset locator button and the big red led on the phone base will start flashing. If your cordless is directly connect
Streszczenie treści zawartej na stronie nr. 8
PRE-DAILLING Pre-dial allows you to enter a telephone number and verify it on the screen before you place the call. The screen displays the last 12 digits dialled but you can enter up to 2 digits. • In standby mode enter the phone number you wish to dial. • To enter a pause, press the button and a dash “-“will appear in the display. • If you make a mistake, press DEL to erase one digit at a time. Or you can press and hold the DEL button to clear the entire number and retu
Streszczenie treści zawartej na stronie nr. 9
HANDSET RINGER VOLUME • While the handset is in the standby mode press the volume button. • Press the to decrease the volume level and to increase the volume level. The display shows the current volume level: the less “0’s” is the lowest level and more “00000” is the highest level.); the % symbol indicates the ringer is turned off. • Press the button again to confirm, otherwise wait a few seconds for the new setting to be automatically confirmed and the display to get bac
Streszczenie treści zawartej na stronie nr. 10
TURNING OFF THE HANDSET RINGER • When the handset is in the standby mode press and hold for a few seconds the * button, the symbol % will appear on the display. • To turn the ringer back on, press and hold again the button * , the symbol % will disappear from the display. IMPORTANT: with this function active only the base will ring and the call symbol will flash on the display. MESSAGE WAITING INDICATION You have to subscribe to a voice message service (eg Telstra Message Ban
Streszczenie treści zawartej na stronie nr. 11
PHONEBOOK MEMORIES AND CALLER ID MEMORIES You can store up to 10 numbers in the phonebook memory. Each stored number can be up to 25 digits. TO STORE A NUMBER IN THE PHONEBOOK Make sure the handset is in the standby mode. Press the button and hold it until the symbol &flashes on the display. 1. Key in the number you want to store (max 25 digits). 2. If you need to correct a number whilst entering use the and buttons to move the cursor from a digit to another, and the DEL
Streszczenie treści zawartej na stronie nr. 12
CALLER ID If you subscribe to your network providers Caller ID service (charges may apply) your phone automatically stores the numbers of the last 20 incoming calls. When the phone rings and caller information is received, the display will show the last 14 digits of the callers number. When in the standby mode and there are calls you haven’t answered, the symbol flashes on the display. When you review these calls the symbol will remain constant on the display. Refer to t
Streszczenie treści zawartej na stronie nr. 13
TO RETURN A CALL • In standby mode, press the Phone button to enter the list. • Use the and buttons to select the number you want to call back. - To call back a number when the call details (date and time or telephone number) are displayed, just press three or the Xbutton. TO DELETE A CALLER ID RECORD A simple operation allows you to delete a record from the list: • In standby mode, press the button to enter the list. • Use the and the buttons to select the record you want to d
Streszczenie treści zawartej na stronie nr. 14
TROUBLESHOOTING TROUBLESHOOTING Are you having trouble with your phone? Here are some answers to common questions. Problems Solutions The phone does • Make sure that adaptor and not work at all phone cord are connected properly. • Check that the batteries are fully charged and installed properly. • This phone does not work during power failure. The phone does • Make sure the adaptor and the not ring phone cord are connected properly. • Move the handset closer
Streszczenie treści zawartej na stronie nr. 15
Notes for operation in New Zealand The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does i
