Streszczenie treści zawartej na stronie nr. 1
User Manual
2.4 GHz Cordless
Telephone/Answering
System E2126/E1126
with Caller ID & Call Waiting
14
Streszczenie treści zawartej na stronie nr. 2
Congratulations on your purchase of this AT&T product. Before using this telephone system, you must read Important Safety Instructions on pages 44 to 46 of this manual. NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call Toll Free 1 (800) 222-3111 In Canada, Call 1 (866) 288-4268 or visit our website at www.telephones.att.com Model No.: AT&T E2126/E1126 Pr
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT Information about Caller ID with Call Waiting This product has a Caller ID with Call Waiting feature that works with service from your local phone service provider. Caller ID with Call Waiting lets you see who is calling before you answer the phone, even when you’re on another call. You may need to change your phone service to use this feature. Contact your phone service provider if: • You have both Caller ID and Call Waiting, but as separate services (you may need combined ser
Streszczenie treści zawartej na stronie nr. 4
You must install and See page 7 charge the battery before STOP! for easy instructions. using the telephone. For customer service or product information, visit our web site at www.telephones.att.com or call 1-800-222-3111. In Canada, call 1-866-288-4268. CAUTION: To reduce the risk of fire or injury to persons or damage to the tele- phone, read and follow these instructions carefully: Use only Replacement Battery 3301 (SKU 91076. Part Number 80-5071-00-00). Do not dispose of the battery in
Streszczenie treści zawartej na stronie nr. 5
User Manual 2.4 GHz Cordless Telephone / Answering System E2126/E1126 with Caller ID & Call Waiting 14 Table of contents To review your call log .....................23 Getting Started To dial a call log entry .......................24 Quick reference guide ........................2 To delete call log entries ..................25 Parts checklist ......................................4 To add entries to phone directory ..26 Before you begin ..................................5 Telephone base
Streszczenie treści zawartej na stronie nr. 6
Getting Started Quick reference guide Cordless Handset 02 MISSED CALLS AM 8/12 10:06 Date Time MENU/SELECT PHONE/FLASH Press to display menu, or to store a Press to make or answer a call. programming option (see pages 10-11). During a call, press to receive an incoming call, if Call Waiting is activated (see page 14). CID V OFF While in menus, press to scoll down. During a call, press to hang up. When phone is not in use, press to display During program
Streszczenie treści zawartej na stronie nr. 7
Getting Started Quick reference guide Telephone Base 14 CHARGE/IN USE HANDSET LOCATOR Flashes when the cordless handset is in use. Press to page the cordless handset. Press again, On steady when the cordless handset is properly positioned to press OFF on cordless handset, or place cordless charge in the base. handset in the base to cancel the page. Flashes during an incoming call’s ringing. Answering System Controls (see pages 27-35 ) 14 Press to play or stop playing messages. ANSWER ON/OFF .
Streszczenie treści zawartej na stronie nr. 8
Getting Started Getting Started Parts checklist Save your sales receipt and original packaging in case you need to ship your telephone for warranty service. 14 MUTE CHAN REDIAL Power adapter Telephone base Cordless handset Telephone line cord Belt clip Wall mount bracket Battery compartment door Battery pack 4 4
Streszczenie treści zawartej na stronie nr. 9
Getting Started Getting Started Before you begin Caller ID and Call Waiting Telephone Operating Range Caller ID with Call Waiting features in The cordless telephone handset oper- this telephone let you see who's call- ates with the maximum power allowed ing before you answer the phone, even by the Federal Communications when you're on another call. These Commission (FCC). This cordless features require services provided by handset and the telephone base unit your local telephone company
Streszczenie treści zawartej na stronie nr. 10
Getting Started Telephone base installation Install the telephone base as shown below. Choose a location in a central location within the home and: Away from any other cordless (wireless) device such as cordless telephones, 802.11 wireless router (for example, WiFi). Away from other electronic equipment, microwave oven, television, computer, etc. If you need to install your phone within the same room as other cordless phones or wireless products, you may need to select a different chann
Streszczenie treści zawartej na stronie nr. 11
Getting Started Battery installation & charging After battery installation, place the cordless handset in the base and allow to charge for at least 16 hours before use. You can keep the battery charged by returning the cordless handset to the base after each use. When the battery is fully depleted, a recharge takes about 16 hours. The talk time on a fully charged battery is about four hours depending on environmental conditions, and the standby time is approximately five days. Actual ba
Streszczenie treści zawartej na stronie nr. 12
Getting Started Wall mounting The base can be installed on any standard phone outlet as shown below. Choose a loca- tion in a central location within the home, away from electronic equipment such as per- sonal computers, computer routers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. 1) Connect telephone line cord and AC power cord to telephone jack and wall jacks, as shown on page 6. 2) Install wall mount bracket onto set. First put the two front wall-m
Streszczenie treści zawartej na stronie nr. 13
Getting Started Belt clip & optional headset Install belt clip as shown below if desired. Snap belt clip into notches on side of cordless handset. Rotate and pull to remove. For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. Plug 2.5 mm headset into jack on side of cord- less handset (beneath small rubber cap). MUTE CHAN REDIAL 9
Streszczenie treści zawartej na stronie nr. 14
T Telephone Operation elephone Operation Cordless handset programming Follow the steps below to program the cordless hand- set. To stop at any time, press OFF. If the phone rings, programming stops automatically so you can answer the call. Choose cordless handset ringer sound 1. Press MENU to begin programming. 2. Press ^ or V until the screen displays RINGER: and the current setting. 3. Press SELECT to start changing current setting. 4. Press ^ or V to display 1, 2, 3, or 4. You will hear
Streszczenie treści zawartej na stronie nr. 15
Telephone Operation Cordless handset programming Choose dial mode The dial mode defaults to TONE. If you do not have touch tone service, you’ll need to change the setting to pulse by following these steps: 1. Press MENU to begin programming. DIAL MODE: TONE 2. Press ^ or V until the screen displays DIAL MODE: and the current setting. 3. Press SELECT to start changing current setting. 4. Press ^ or V to display TONE or PULSE. 5. Press SELECT to choose displayed dial mode and exit. Clear Vo
Streszczenie treści zawartej na stronie nr. 16
T Telephone Operation elephone Operation Basic cordless handset operation Making and answering calls To answer an incoming call, press PHONE (or SPEAKER, or any dial pad key). To make a call, press PHONE or SPEAKER, then dial a number. Press OFF or place the cordless handset back in the base to hang up. To preview numbers before dialing, enter numbers first, then press PHONE or SPEAKER to dial. Press V at any time to make corrections as you are entering numbers. The screen displays the el
Streszczenie treści zawartej na stronie nr. 17
T Telephone Operation elephone Operation Base operation Handset Locator Press to page the cordless handset for up to 60 seconds. Press again, press OFF on cordless handset, or place cord- less handset in the base to cancel the page. 14 NOTE: If the cordless handset is charging in the base, pressing HANDSET LOCATOR does not generate any paging tone. 13 13
Streszczenie treści zawartej na stronie nr. 18
T Telephone Operation elephone Operation Options while on calls Volume control While on a call, press the VOLUME buttons on the cord- less handset to adjust listening volume. To adjust the speakerphone listening volume, press SPEAKER, then press the VOLUME buttons. V^ Volume Flash Call waiting If you have Call Waiting service, you will hear a beep if someone calls while you are already on a call. Press Tone FLASH to put your current call on hold and answer the new call. You can press thi
Streszczenie treści zawartej na stronie nr. 19
Directory Memory capacity The directory can store up to 30 entries (including nine PAT JOHNSON speed dial locations). Each entry can contain a number 5550100 up to 24 digits, and a name up to 15 letters long. A con- venient search feature can help you find and dial num- bers quickly (see page 19). Speed dialing On the cordless handset, the nine speed dial locations (1 through 9) are reserved for numbers you dial frequently. These numbers can be dialed with two button presses MUTE CHAN REDI
Streszczenie treści zawartej na stronie nr. 20
Director Directory y NOTE: If all memory locations are in use, an error tone will sound Speed dialing when you attempt to enter a number. This means the memory is full, and you will On the cordless handset, the numbers called most fre- not be able to store a new number until you delete an existing one. quently can be stored in speed dial locations 1-9 and dialed with only two button presses. You can enter 9 Speed Dial numbers of up to 24 digits. MENU 1 Each number is stored in a one-digi
