Zoom LIVETRAK-L-12 user manual

Here are the steps on how to use Zoom LiveTrak L-12:
1. Setup: The first step in using the Zoom LiveTrak L-12 is setting it up. Plug the provided AC adapter into the unit and then plug the adapter into a wall outlet. The unit will take a few moments to boot up.
2. Connection: You'll want to connect your instruments or microphones to the appropriate input channels. The LiveTrak L-12 has 12 input channels, all with high-quality microphone preamps. You can use the XLR or 1/4" inputs located on the back of the unit.
3. Level Setting: Set your level by adjusting the gain knob for each individual channel. You can monitor the level by looking at the LED level meter on the L-12's front panel. You can also adjust the L/R fader to balance out the mix.
4. Track Selection: Select the track you’d like to record across by pressing the REC button for that respective channel. This puts the channel into Standby mode, indicated by the red blinking light above the channel fader.
5. Monitoring: Connect your headphones or speakers to the unit in order to monitor your mix. Adjust the master fader to control the overall output level.
6. Recording: When you're ready to start recording, press the Play/Pause button while holding down the Record button. The Record button will light up red while recording and the Transport indicator will start moving.
7. Playback: To listen back to your recording, press the Stop button and then press the Play/Pause button. Adjust the levels of your audio as needed using the fader controls.
8. Mixdown: Once your recording is finished, you can use the faders, EQ, and pan controls to create a final mix on the console. This can then be exported and saved to a connected USB drive.
9. Saving and Exporting: After creating your mix, press the Menu button and navigate to the Project sub-menu. Here you can save and export your project.
Remember to read through your user manual for additional instructions on more specific operations or troubleshooting. By following these basic steps, you'll be able to use the Zoom LiveTrak L-12 effectively to capture high-quality recordings and mixes.

The sample rate of the Zoom LiveTrak L-12 is 44.1 kHz.

To record with the Zoom LiveTrak L-12, follow these steps:
1. Connect your audio sources: Plug in your microphones, instruments, or other audio sources into the respective inputs on the L-12. You can connect up to 12 channels simultaneously.
2. Connect your headphones: Plug your headphones into the headphone jack on the L-12 to monitor the audio.
3. Set your input levels: Use the input gain knobs for each channel to adjust the input levels. Ensure the sound meters on the L-12 are showing appropriate levels without clipping (going into the red).
4. Connect your recording device: Connect an external storage device like an SD card or USB flash drive to the L-12's USB ports for recording. The L-12 can record directly to these devices without the need for a computer.
5. Choose your recording format: Press the Audio button on the L-12 and select the recording format, sample rate, and bit depth options that best suit your needs.
6. Arm the tracks for recording: Press the Rec button for each track that you want to record. The button will light up, indicating that the track is armed and ready to record.
7. Start recording: Press the Record button on the L-12 to start recording. The button will blink, indicating that recording is in progress.
8. Stop recording: Press the Stop button on the L-12 to stop recording. The record button will stop blinking, indicating that the recording has ended.
9. Playback your recorded tracks: Use the Play button to listen to your recorded tracks. Adjust the faders and other controls as needed to mix and balance your recorded audio.
10. Save and export your recordings: Once you are satisfied with your recordings, you can save them to the connected storage device. You can then copy the recordings to your computer or any other device for further editing or sharing.
Remember to consult the Zoom LiveTrak L-12 user manual for detailed instructions and additional features specific to your device.

The Zoom LiveTrak L-12 uses an SD card for recording and playback. It is compatible with SD cards up to 128GB. It is recommended to use SDHC or SDXC cards with a Class 10 or higher rating for optimal performance.