Zanussi ZWT71401WA user manual

There could be several reasons why your Zanussi washing machine won't start. Here are few possibilities:
1. Power Issue: Ensure that the machine is properly plugged in and getting power. Check if there's any issue with the power socket by plugging in another device.
2. Door not closed correctly: If the door of your washing machine is not closed correctly, it may prevent your machine from starting. Make sure the door is closed and latched properly.
3. Delay Start: Make sure that the 'delay start' function hasn't been accidentally activated.
4. Faulty or Damaged Buttons: If buttons or control panel are faulty, it may prevent the machine from starting.
5. Needs a Reset: Sometimes, like many electronics, it might need a reset. Unplug the machine for about a minute and then plug it back in to see if it helps.
6. Child lock: If your model has a child lock, ensure it has not been activated by mistake.
7. Faulty Parts: Faulty parts like door latch, main control board, timer or starter switch could be the issue.
Remember to always unplug your washing machine before doing any troubleshooting. If you are unsure, it's always better to call a professional for help.

To reset a Zanussi appliance, you can try the following steps:
1. Unplug the appliance from the power outlet.
. Wait for about 10-15 seconds.
3. Plug the appliance back into the power outlet.
4. Turn on the appliance.
5. Check if the appliance has reset.
If this does not work, you can consult the user manual or contact Zanussi customer support for specific instructions on how to reset your particular model.

There could be a few reasons why your Zanussi washing machine is stuck on 1 minute:
1. Sensor or timer malfunction: The sensor or timer responsible for determining the remaining time on the wash cycle may be faulty or malfunctioning, causing it to get stuck at 1 minute. In this case, you may need to have the sensor or timer replaced or repaired.
2. Load imbalance: If the load inside the washing machine is not distributed evenly, it can cause the machine to detect an imbalance and get stuck at 1 minute. Try redistributing the load inside the machine and ensuring that it is balanced.
3. Clogged filter or drainage issue: A clogged filter or drainage problem can also cause the washing machine to get stuck at 1 minute. Check and clean the filter and make sure the drainage system is clear of any obstructions.
4. Power supply issue: Sometimes, power supply problems can cause the washing machine's electronics to malfunction, resulting in it getting stuck. Check if the machine is properly connected to a stable power source and try resetting it.
If none of these solutions work, it is recommended to contact Zanussi customer support or a professional appliance repair service for further assistance.

Yes, most Zanussi washing machines have a reset button. The location of the reset button may vary depending on the model, but it is usually located on the control panel or inside the door of the machine. If you are unable to locate the reset button, you can refer to the user manual of your specific model for more information.