Yamaha RX-V379 user manual

To reset the Bluetooth on your Yamaha RX-V379 receiver, you can follow these steps:
1. Turn off the receiver.
. Locate the unit's control panel on the front of the receiver.
3. Locate the "Advanced Setup" button on the control panel, which is marked with a gear icon.
4. Press and hold the "Advanced Setup" button for about 5 seconds until you see "Advanced Setup → 7.System → RESET" on the front panel's display.
5. Press the "Straight" button repeatedly until "RESET" is displayed.
6. Press the "Select" button to enter the reset menu.
7. Use the left or right arrow buttons to select "INIT E2P", and then press the "Select" button.
8. Use the left or right arrow buttons again to select "OK", and press the "Select" button to confirm the reset.
9. The receiver will reboot and the reset process will be completed, including the Bluetooth settings.
After resetting, you will need to pair your Bluetooth devices with the Yamaha RX-V379 receiver again. Follow the pairing instructions in the receiver's manual to establish a new Bluetooth connection.

Yes, the Yamaha RX-V379 has built-in Bluetooth capabilities. It allows you to wirelessly stream audio from compatible devices, such as smartphones, tablets, or computers.