Yamaha PSR-E333 user manual

There could be several reasons why your Yamaha PSR-E333 keyboard is not making sound. Here are a few troubleshooting steps you can try:
1. Check the Volume: Make sure the volume of your keyboard is turned up. There is usually a dedicated volume knob or button on the keyboard. Adjust it to an audible level.
2. Check the Mute Button: Ensure that the keyboard's mute button is not turned on. Many Yamaha keyboards have a dedicated button to mute or unmute the sound. Press it to check if it resolves the issue.
3. Check the Amplifier/External Speakers: If you are using an amplifier or external speakers with your keyboard, make sure they are turned on, connected properly, and set to an appropriate volume.
4. Check the Headphones: If you have the headphones plugged into the keyboard, ensure that they are working correctly. Try using a different pair of headphones to check if it's a problem with the headphones themselves.
5. Check the Connections: Verify that the keyboard's audio outputs are connected properly to an amplifier, external speakers, or headphones. Ensure that both ends of the cables are securely plugged in.
6. Check the Power Supply: Ensure that the keyboard is powered on and connected to a power source. Look for any indicators or lights on the keyboard that indicate it is receiving power.
If none of these steps resolve the issue, it's possible that there is an internal problem with the keyboard's audio circuitry. In such cases, it might be best to consult a professional technician or contact Yamaha customer support for further assistance.

To connect your Yamaha PSR-E333 keyboard to your computer, you will need a USB-MIDI interface cable.
Here are the steps to connect the PSR-E333 to your computer:
1. Turn off both your computer and the PSR-E333 keyboard.
. Connect one end of the USB-MIDI interface cable to the USB port on your computer.
3. Connect the other end of the cable to the USB TO HOST port on the back of your keyboard.
4. Turn on your computer.
5. Turn on your PSR-E333 keyboard.
6. Install any necessary drivers or software that may have come with your USB-MIDI interface cable.
(Note: Some cables may not require additional software installation)
7. Once the drivers are installed, open your preferred MIDI-compatible software on your computer.
8. In the software's settings, select the Yamaha PSR-E333 as the MIDI input device.
9. You should now be able to send and receive MIDI data between your keyboard and computer.
Make sure MIDI mode is enabled on your PSR-E333 by following these steps:
1. Press the "FUNCTION" button on the keyboard.
. Use the cursor buttons to navigate to the "MIDI" menu.
3. Press the "+" button to enter the MIDI menu.
4. Use the cursor buttons to select "MIDI" and press the "EXIT" button to save the setting.
Your Yamaha PSR-E333 should now be successfully connected to your computer, and you can use it as a MIDI controller or transfer data between the keyboard and your music software.

Yes, the Yamaha PSR-E333 is touch-sensitive. It has Touch Response feature which means the volume and tone of the sound produced varies with the strength of your playing.