White Knight 44AW user manual

There could be several reasons why your White Knight dryer is not heating up:
1. Faulty Heating Element: The heating element may be burned out or defective.
. Thermostat Problems: The dryer's thermostat regulates the temperature inside the drum. If it's faulty, it might not signal the heating element to heat up.
3. Blocked Ventilation: If the vent or lint screen is blocked, it may affect the dryer's ability to heat.
4. Faulty Timer Motor: If your dryer's timer motor is malfunctioning, it may not be able to properly control the heating cycle.
5. Faulty Fuses or Circuit Breakers: If the dryer's fuse has blown or the circuit breaker has tripped, it may affect the unit's ability to heat.
Please consult a professional to diagnose and repair your dryer in case it is not heating up.

To reset a White Knight C44AW tumble dryer, you can follow these steps:
1. Unplug the dryer from the power supply for safety.
. Wait for a few minutes to allow any residual power to dissipate.
3. Open the dryer door and locate the control panel.
4. Look for a reset button or a small hole labeled "Reset" on the control panel.
5. If there is a reset button, press and hold it for about 10 seconds using a small pointed object like a pen tip or paperclip.
6. If there is a small hole, use a small pointed object to press and hold the reset button inside the hole for about 10 seconds.
7. Release the reset button or remove the object from the hole.
8. Plug the dryer back into the power supply.
9. Turn on the dryer and check if it has reset to the default settings.
Please note that the exact reset procedure may vary slightly depending on the specific model of your White Knight C44AW tumble dryer. Therefore, referring to the user manual provided with your appliance is always recommended for accurate instructions.