Whirlpool WRX735SDHZ user manual

To get your Whirlpool service manual, you can try the following steps:
1. Visit the official Whirlpool website: Go to www.whirlpool.com.
2. Navigate to the "Support" or "Customer Service" section: Look for a tab or link that directs you to customer support or service information.
3. Find the "Manuals & Literature" section: Once you're on the customer support page, you may find a specific section dedicated to manuals and literature. Look for a link that leads you to this section.
4. Enter your appliance's model number: Whirlpool typically requires you to enter your appliance's model number to search for the appropriate manual. This number can usually be found on a sticker or plate attached to the appliance.
5. Locate and download the manual: After entering the model number, you should see a list of available manuals for your appliance. Click on the manual you need and download it in PDF format.
If you're unable to find the manual on the Whirlpool website, you can try alternative methods:
6. Visit other online sources: Several websites specialize in hosting appliance manuals. Conduct a web search using your appliance model number along with the term "service manual" to find alternative sources.
7. Contact Whirlpool customer service directly: If all else fails, reach out to Whirlpool's customer service department either through their website or by phone. Explain that you need a service manual for your specific appliance, and they may be able to provide it or guide you in acquiring one.
Remember to always exercise caution and consult a professional when attempting to repair any appliance or make any significant alterations.

There could be several reasons why your Whirlpool refrigerator is not making ice but the water dispenser is still working. Here are a few possible causes:
1. Freezer temperature: Make sure that the freezer temperature is set to the correct level (usually between 0-5 degrees Fahrenheit or -18 to -15 degrees Celsius). If the freezer is too warm, it may not be able to properly freeze the water into ice.
2. Water supply issue: Check to see if there is a problem with the water supply to the refrigerator. Ensure that the water line is connected properly and not kinked or blocked. You may also want to check if the water filter is clogged and needs to be replaced.
3. Faulty ice maker: The problem might be with the ice maker itself. Ice makers have various components such as a motor, thermostat, and water valve, which can malfunction and prevent ice production. If the ice maker is faulty, it may need to be repaired or replaced.
4. Ice maker switch: Double-check if the ice maker switch is turned on. Sometimes it can accidentally be switched off, stopping ice production while allowing water to still dispense.
If troubleshooting these possibilities does not solve the issue, it is recommended to reach out to Whirlpool customer service or a professional appliance repair technician for further assistance.