Whirlpool WMH53520CS user manual

There could be several reasons why your Whirlpool microwave is not working. Here are some common issues that you can check:
1. Power supply: Ensure that the microwave is properly plugged into a working power outlet and that the circuit breaker or fuse has not tripped.
2. Control panel: If the control panel or display is not functioning, there may be a problem with the keypad or control board. Make sure it is not locked or that there are no error codes displayed.
3. Door switch: The microwave has safety switches that detect whether the door is properly closed. If the door switch is faulty or not activating properly, the microwave may not start. Check if the door is closing properly and if the switch is working.
4. Start button: If the start button is not working, there might be a problem with the control panel or a faulty connection.
5. Internal fuse: Microwaves also have an internal fuse that can blow if there is an electrical surge or failure. You can check if the fuse is blown by using a multimeter to test for continuity.
If none of these troubleshooting steps fix the issue, it might be best to contact a professional technician or Whirlpool customer support for further assistance.

To reset your Whirlpool microwave, you can follow these steps:
1. Unplug the microwave from the power outlet.
. Leave it unplugged for about 1-2 minutes.
3. Plug the microwave back into the power outlet.
4. Check if the control panel display is blank or shows "0:00."
5. If it shows "0:00," the microwave has been successfully reset.
If your Whirlpool microwave has specific reset instructions mentioned in the user manual, it's recommended to refer to the manual for accurate and detailed steps.