Whirlpool WMH31017HS user manual

To pop popcorn in a Whirlpool microwave, follow these steps:
1. Place a microwave-safe bowl or a specialized microwave popcorn popper in the center of the microwave's turntable.
. Open the popcorn bag or container and pour the popcorn into the bowl or popper. Make sure to remove any unpopped kernels or debris.
3. Close the microwave door securely. Do not use the popcorn feature if the door is open or not properly closed.
4. Press the "Popcorn" or "Sensor Popcorn" button on the microwave control panel. If your Whirlpool microwave does not have a specific popcorn button, refer to step 6.
5. Select the desired cooking time or popcorn size, if prompted. Some Whirlpool microwaves have sensor technology that automatically detects and adjusts the cooking time based on the amount of popcorn in the microwave.
6. If there is no popcorn button, set the microwave to high power (usually, the default setting) and manually input the cooking time suggested on the popcorn packaging. It is generally recommended to start with a shorter time and adjust accordingly to avoid burning the popcorn.
7. Press the "Start" button to begin cooking.
8. Stay near the microwave and listen for the popping sound. Once the popping slows down to about 2 seconds between pops, or when there is a pause of more than 2 seconds, the popcorn is likely done.
9. Carefully remove the bowl or popper from the microwave using oven mitts or a towel as they may be hot.
10. Let the popped popcorn cool for a minute before opening the lid or covering to prevent steam burns.
11. Serve and enjoy your freshly popped popcorn!
Note: Always refer to the specific instructions on the popcorn packaging and follow the manufacturer's guidelines for your Whirlpool microwave model.

There could be several reasons why your Whirlpool microwave is not working. Here are some common issues that you can check:
1. Power supply: Ensure that the microwave is properly plugged into a working power outlet and that the circuit breaker or fuse has not tripped.
2. Control panel: If the control panel or display is not functioning, there may be a problem with the keypad or control board. Make sure it is not locked or that there are no error codes displayed.
3. Door switch: The microwave has safety switches that detect whether the door is properly closed. If the door switch is faulty or not activating properly, the microwave may not start. Check if the door is closing properly and if the switch is working.
4. Start button: If the start button is not working, there might be a problem with the control panel or a faulty connection.
5. Internal fuse: Microwaves also have an internal fuse that can blow if there is an electrical surge or failure. You can check if the fuse is blown by using a multimeter to test for continuity.
If none of these troubleshooting steps fix the issue, it might be best to contact a professional technician or Whirlpool customer support for further assistance.

To reset your Whirlpool microwave, you can follow these steps:
1. Unplug the microwave from the power outlet.
. Leave it unplugged for about 1-2 minutes.
3. Plug the microwave back into the power outlet.
4. Check if the control panel display is blank or shows "0:00."
5. If it shows "0:00," the microwave has been successfully reset.
If your Whirlpool microwave has specific reset instructions mentioned in the user manual, it's recommended to refer to the manual for accurate and detailed steps.

Using a microwave oven like the Whirlpool WMH31017HS typically involves the following steps:
1. Preparation: Place the food or beverage item you want to heat or cook inside a suitable microwave-safe dish or container. Ensure that the dish is appropriate for microwave use and that it fits comfortably inside the oven without touching the sides.
2. Power connection: Plug the microwave oven into an electrical outlet. Make sure the outlet is properly grounded and that the voltage matches the voltage rating specified for the appliance.
3. Adjusting power level (optional): If you want to adjust the power level, press the "Power" button on the control panel. Select the desired power level using the numeric keypad or the pre-set power levels provided. This step is usually optional as most microwaves default to full power.
4. Setting cooking time: Use the numeric keypad on the control panel to enter the desired cooking time. Some microwaves have pre-set time buttons that you can use for common items. If you need a specific cooking time, enter the time manually in hours, minutes, and seconds.
5. Starting the microwave: Press the "Start" or "Enter" button to begin the microwave cycle. The oven will start the countdown timer and initiate the microwave power.
6. Pausing or stopping: If you need to pause the cooking process, you can usually press the "Pause" or "Stop" button on the control panel. This allows you to open the door or check on the progress. To resume heating, close the door and press the "Start" or "Resume" button.
7. Stirring or flipping (if required): Depending on the food being heated, you may need to pause the microwave at certain intervals to stir or flip the food to ensure even cooking. Consult the food's packaging or recipe for specific instructions.
8. Alarms and notifications: When the cooking time is complete, most microwaves will produce a beep or series of beeps to alert you. The oven's display will often show a notification, and some models may even turn off the microwave automatically. Open the door carefully, as the dish and steam may be hot.
It's important to note that specific steps may vary depending on the brand and model of the microwave oven. Always refer to the user manual provided by the manufacturer for detailed instructions and safety information specific to your particular microwave oven model.