Whirlpool WFW6620HW user manual

1. Turn off the washer and unplug it from the electrical outlet.
. Wait for approximately one minute.
3. Plug the washer back in and switch the washer back on.
4. Open and close the door six times within 12 seconds to send a “reset” signal to all the components.
If this doesn't work, you might need to call a professional or contact Whirlpool customer service for help. Please note that frequent resetting is not normal and could indicate an issue with the machine that needs to be addressed.
Always refer to your user manual for specific instructions related to your specific model.

To get your Whirlpool service manual, you can try the following steps:
1. Visit the official Whirlpool website: Go to www.whirlpool.com.
2. Navigate to the "Support" or "Customer Service" section: Look for a tab or link that directs you to customer support or service information.
3. Find the "Manuals & Literature" section: Once you're on the customer support page, you may find a specific section dedicated to manuals and literature. Look for a link that leads you to this section.
4. Enter your appliance's model number: Whirlpool typically requires you to enter your appliance's model number to search for the appropriate manual. This number can usually be found on a sticker or plate attached to the appliance.
5. Locate and download the manual: After entering the model number, you should see a list of available manuals for your appliance. Click on the manual you need and download it in PDF format.
If you're unable to find the manual on the Whirlpool website, you can try alternative methods:
6. Visit other online sources: Several websites specialize in hosting appliance manuals. Conduct a web search using your appliance model number along with the term "service manual" to find alternative sources.
7. Contact Whirlpool customer service directly: If all else fails, reach out to Whirlpool's customer service department either through their website or by phone. Explain that you need a service manual for your specific appliance, and they may be able to provide it or guide you in acquiring one.
Remember to always exercise caution and consult a professional when attempting to repair any appliance or make any significant alterations.

Here are some troubleshooting steps to help you address issues with your Whirlpool washing machine:
1. Check power supply: Ensure that the washing machine is plugged in properly and that the power outlet is functioning. Test the outlet with another device to confirm it is not the source of the problem.
2. Check the water supply: Make sure the water faucets connected to the washing machine are turned on and providing sufficient water pressure. Verify that there are no kinks or blocks in the hoses.
3. Check for error codes: Most modern Whirlpool washing machines have error code displays. Refer to the user manual to understand what each code means and follow the corresponding troubleshooting steps.
4. Examine the display panel: If the washing machine is not responding or the display panel is not working, press the "Power" button to completely power down the machine. Wait for a few minutes, then turn it back on. This step might help refresh the control system.
5. Reset the machine: If your Whirlpool washing machine is experiencing issues, try resetting it by unplugging it from the power source for a few minutes. Then, plug it back in and turn it on to see if the problem is resolved.
6. Check for excessive load: Overloading the washing machine can result in imbalances and malfunctions. Ensure that you are not placing more laundry in the machine than the recommended capacity.
7. Clean the filter: Some Whirlpool washing machines have a filter that can become clogged with lint, dirt, or other debris. Refer to the user manual to locate the filter and clean it regularly.
8. Inspect the drum for obstructions: If you hear strange noises or if the drum does not spin properly, there might be an object stuck in it. Carefully inspect the drum for loose items like coins, pins, or buttons that might be causing the problem.
9. Contact customer service: If the troubleshooting steps above do not resolve the issue, contact Whirlpool's customer service to seek further assistance. They can provide more specific guidance or arrange for a technician to visit your home and inspect the washing machine in detail.
**Note:** Always refer to the user manual for your specific Whirlpool washing machine model, as troubleshooting steps may vary.

There can be several reasons why your Whirlpool washer won't start. Some common causes include:
1. Power issue: Make sure the washer is properly plugged in and that the power outlet is functioning. Check that the circuit breaker hasn't tripped.
2. Door/ lid not fully closed: Ensure that the door or lid is fully closed, as most washers won't start until the door is securely shut.
3. Control lock activated: Some models have a control lock feature that prevents accidental use. Check if the control lock is enabled and deactivate it if necessary.
4. Water supply issue: Make sure the water supply valves to the washer are fully open. If the washer doesn't detect water, it may not start. Check for any kinks or clogs in the water hoses.
5. Defective components: Certain faulty components like the door switch, main control board, or motor could prevent the washer from starting. If none of the above solutions work, it may require professional repair or replacement of these parts.
If you have tried the above troubleshooting steps and the issue persists, it is recommended to contact Whirlpool customer support or a qualified technician for assistance.