Whirlpool MIKROWELLEN user manual

To reset your Whirlpool microwave, you can follow these steps:
1. Unplug the microwave from the power outlet.
. Leave it unplugged for about 1-2 minutes.
3. Plug the microwave back into the power outlet.
4. Check if the control panel display is blank or shows "0:00."
5. If it shows "0:00," the microwave has been successfully reset.
If your Whirlpool microwave has specific reset instructions mentioned in the user manual, it's recommended to refer to the manual for accurate and detailed steps.

There could be several reasons why your Whirlpool microwave display is not working. Some possible causes could include:
1. Power issue: Check if the microwave is properly plugged in and there is power supply to the unit. You can try plugging in another appliance to the same outlet to verify if there is power.
2. Fuse blown: Microwaves have internal fuses that can blow if there is a power surge or electrical issue. Check if the fuse has blown and replace it if necessary.
3. Faulty control board: The display may not be working due to a malfunctioning control board. This can happen due to electronic failures or other faults within the board. In such cases, it may be necessary to replace the control board.
4. Display panel malfunction: The display panel itself may be faulty or damaged, preventing it from functioning properly. In this case, replacing the display panel may be necessary.
5. Technical issue: There may be a technical issue with the microwave, such as loose connections or faulty wiring. It is recommended to consult a professional technician who can diagnose and repair the issue accurately.
If your Whirlpool microwave is still under warranty, it is advised to contact Whirlpool customer service or schedule a service appointment with an authorized technician to resolve the display issue.