Whirlpool 6TH-SENSE user manual

There could be several reasons why your Whirlpool 6th Sense washing machine is not draining properly. Below are some common causes and possible solutions:
1. Clogged Drain Filter: Check if the drain filter is clogged with lint, debris, or foreign objects. Clean or remove any obstructions from the filter and try draining again.
2. Drain Hose Blockage: Inspect the drain hose for any kinks, bends, or blockages. Straighten the hose if necessary and ensure there are no clogs obstructing the flow of water.
3. Pump Motor Issues: The drain pump motor might be faulty or damaged. If you can hear a humming sound coming from the machine but it is not draining, there may be an issue with the pump motor. In such cases, it is advisable to consult a professional technician for repair or replacement.
4. Oversudsing: Excessive use of detergent can create too many suds, causing the machine to struggle with draining. Use the appropriate amount of detergent according to the manufacturer's instructions.
5. Drainage System Problems: There could also be issues with your plumbing or drainage system. Ensure that the drain hose is properly connected to the standpipe or sink, and that the drain itself is not blocked.
If the problem persists after checking these possible causes, it is recommended to contact Whirlpool customer support or a professional appliance repair service for further assistance.

To reset your Whirlpool 6th Sense appliance, you can follow these general steps, as the specific method may vary depending on the model and type of appliance:
1. Power off the appliance: Unplug the power cord from the electrical outlet or turn off the appliance from the circuit breaker.
2. Wait for a few minutes: Leave the appliance unplugged for about 5 minutes to ensure all residual power is discharged.
3. Restore power: Plug the appliance back into the power outlet or turn on the circuit breaker.
4. Set the appliance to default settings: Some appliances may require you to press and hold a specific button combination or follow a series of steps to reset to factory defaults. Consult the user manual of your specific Whirlpool 6th Sense appliance or refer to the control panel for instructions on how to do this.
If you're unable to find the specific procedure for your appliance, you can contact Whirlpool customer support or refer to the user manual for detailed instructions tailored to your model.