Vector SUUNTO user manual

To set your Suunto Barometer Vector, follow these steps:
1. Go to the "Outdoor" mode on your Suunto Vector by pressing the "Mode" button repeatedly until you see the Outdoor mode activated.
. Press and hold the "View" button to enter the settings menu.
3. Scroll through the options by pressing the "Next" button until you find the "Alti-Baro" option.
4. Press the "Enter" button to enter the Alti-Baro menu.
5. In the Alti-Baro menu, use the "Next" and "Back" buttons to navigate between the Altimeter and Barometer settings.
6. To set the barometer, select the Barometer setting by pressing the "Enter" button.
7. Use the "Next" and "Back" buttons to adjust the reference pressure and sea level pressure settings. The reference pressure is the current pressure reading, and the sea level pressure is the pressure at sea level in your current location.
8. Use the "Next" and "Back" buttons to increase or decrease the values and press the "Enter" button to confirm each setting.
9. Once you have adjusted the barometer settings, press the "Mode" button to exit the settings menu.
Note: It is recommended to calibrate your altimeter/barometer regularly to ensure accurate readings.

To change the time on your Suunto Vector watch, follow these steps:
1. Press and hold the "mode" button located at the bottom left corner of the watch for a few seconds until the display enters the setting mode.
2. Scroll through the menu options using the "select" button on the right side of the watch until you reach the "Time" option. Press the "mode" button to confirm.
3. Once in the time settings, use the "select" button to adjust the hour. Press the "mode" button to confirm the hour and move to the minute settings.
4. Use the "select" button again to adjust the minutes, and press the "mode" button to confirm.
5. Continue to use the "select" button to set the date, month, and year following the same process. Press the "mode" button to confirm each setting.
6. After confirming the year, the watch will automatically exit the time-setting mode and return to the normal time display.
Your Suunto Vector watch should now display the correct time according to your settings.

No, the Suunto Vector does not have a built-in light. However, it does have a backlight that can be activated by pressing the buttons on the watch. The backlight illuminates the display for a short period of time to make it easier to read in low light conditions.