Ultimate Ears UE-BOOM user manual

There can be several reasons why your Ultimate Ears speaker is not working. Here are a few troubleshooting steps you can try:
1. Check the power: Ensure that your speaker has enough charge by connecting it to a power source or USB cable to charge it. If it's a battery-powered speaker, make sure the battery is properly inserted and charged.
2. Bluetooth connection: Ensure that your device is properly paired with the speaker. Turn on Bluetooth on your device and search for the speaker in the list of available devices. Once connected, make sure the volume is not set to zero on both your device and the speaker.
3. Reset the speaker: Try resetting the speaker by turning it off and on again or by following the specific instructions in the user manual. This can help resolve any software glitches.
4. Check the audio source: Ensure that the audio source (e.g., device, app) you're playing from is not muted or set to a low volume. Also, try playing music or audio from different sources to see if the issue persists.
5. Check for firmware updates: Visit the official Ultimate Ears website or use their app to check if there are any firmware updates available for your speaker. Keeping the firmware up to date can sometimes resolve compatibility issues.
6. Contact support: If none of the above steps help, reaching out to Ultimate Ears customer support for further assistance is recommended. They may be able to provide more specific troubleshooting steps or guide you through getting your speaker back to working condition.

To connect your Ultimate Ears BOOM to your TV, you can follow these steps:
1. Check if your TV has Bluetooth capabilities: Ensure that your TV supports Bluetooth connectivity. You can refer to your TV's user manual or the manufacturer's website to confirm if it has Bluetooth.
2. Turn on Bluetooth on your Ultimate Ears BOOM: Press and hold the Bluetooth button on the top of your UE BOOM until you hear a tone, indicating that the speaker is in pairing mode. The Bluetooth button is located on the top of the device, marked with the Bluetooth symbol.
3. Enable Bluetooth on your TV: Depending on the TV model, you may need to access the settings menu. Look for the Bluetooth option and turn it on. Once enabled, your TV will start searching for nearby Bluetooth devices.
4. Pair the Ultimate Ears BOOM with your TV: On your TV, locate the list of available Bluetooth devices. It might be called "Available Devices" or "Pairing Devices" in the Bluetooth settings. Select the Ultimate Ears BOOM from the list.
5. Confirm pairing on the UE BOOM: Once your TV has found the UE BOOM, it may ask you to confirm the pairing by pressing the Bluetooth button on the speaker. Press the Bluetooth button on the UE BOOM to complete the pairing process. Your TV and the speaker will establish a Bluetooth connection.
6. Test the connection: After the pairing is successful, test the connection by playing audio or video on your TV. The sound should now be transmitted to your UE BOOM.
Note: Some TVs may require an additional Bluetooth transmitter/receiver device if they do not have built-in Bluetooth capabilities. This device plugs into the TV's audio output and connects to the UE BOOM. Make sure to follow the instructions provided with the transmitter/receiver for pairing with the speaker.
If your TV does not support Bluetooth or you encounter difficulties, you can also connect the UE BOOM to your TV using a 3.5mm auxiliary cable (if your TV has an audio output port) or through an HDMI or optical audio adapter, depending on the available ports on your TV.

To check if your Ultimate Ears BOOM is charging, follow these steps:
1. Connect the included USB charging cable to the charging port on the bottom of the BOOM.
. Plug the other end of the USB cable into a power source such as a computer, wall adapter, or a charging dock.
3. Look for the LED indicator located on the top of the BOOM. When the BOOM is charging, the light will flash slowly in an orange color.
4. Allow the BOOM to charge for a few hours. The LED indicator should stop flashing and remain a solid orange when the battery is fully charged.
Note: If the LED indicator does not respond or the light does not turn on, try using a different USB cable or power source. If the issue persists, there may be a problem with the charging port or the battery, and you should contact Ultimate Ears customer support for further assistance.