Ultimate Ears HYPERBOOM user manual

To reset your Ultimate Ears HYPERBOOM, follow these steps:
1. Make sure the HYPERBOOM is turned on.
. Press and hold the Bluetooth button and the volume down button simultaneously for about 10 seconds.
3. The power light on the front of the speaker will flash briefly, indicating that the reset has been initiated.
4. Release the buttons after the light blinks.
5. The HYPERBOOM is now reset and ready to be set up again.
Note: Resetting the speaker will clear any paired devices and settings, so you will need to pair your devices again after the reset.

To connect the Ultimate Ears HYPERBOOM without using the app, you can follow these steps:
1. Power on the HYPERBOOM by pressing the power button located at the back of the speaker.
. On your music-playing device (phone, tablet, computer), enable Bluetooth in the settings.
3. Go to the Bluetooth settings on your device and search for available devices.
4. Look for "HYPERBOOM" in the list of available Bluetooth devices and select it to establish a connection.
Once the connection is made, you should be able to play music or any audio from your device through the HYPERBOOM. Keep in mind that some features and customizations may require the Ultimate Ears app, but basic audio playback should work without it.

To make your HYPERBOOM speaker louder, you can follow these steps:
1. Position the speaker properly: Place the HYPERBOOM in an open space or near a wall to allow the sound to bounce off and fill the room more effectively.
2. Adjust the volume on the speaker: Use the volume buttons on the HYPERBOOM or the connected device to increase the volume. Be cautious not to exceed the speaker's maximum volume level, as it may cause distortion or damage.
3. Connect to a higher output device: If you're playing audio through a Bluetooth connection, ensure that the source device's volume is set to its maximum level. This step may vary depending on the device you're using.
4. Enable any audio enhancements: Some devices have audio enhancement features like equalizers or bass boost that can make the sound louder and more dynamic. Check your device's settings and enable any such features if available.
5. Position the speaker closer to your listening area: Moving the HYPERBOOM closer to you or the desired listening area can make the sound seem louder, as it will be more focused on you.
6. Use PartyUp: If you have multiple Ultimate Ears speakers, you can use the PartyUp feature to connect them all together and amplify the volume.
Remember to be mindful of your surroundings and your hearing while trying to increase the volume.

There could be several reasons why there is no sound on your Ultimate Ears Hyperboom speaker. Here are a few troubleshooting steps you can try:
1. Check the volume level: Make sure the volume on your speaker is turned up and not muted. You can adjust the volume using the volume buttons on the speaker or through the connected device.
2. Check the connection: Ensure that your speaker is properly connected to the audio source. If you're using Bluetooth, make sure your device is paired with the speaker. If you're using a wired connection, ensure the cable is securely plugged in.
3. Restart the speaker: Sometimes, a simple restart can fix minor issues. Turn off your Hyperboom speaker, wait a few seconds, and then turn it back on again.
4. Check the audio source: Verify that the audio source (e.g., phone, tablet, computer) is playing audio properly. Try playing audio from a different source or using a different app to isolate the issue.
5. Update firmware: Ensure that your speaker has the latest firmware installed. You can check for firmware updates through the Ultimate Ears app or by visiting the Ultimate Ears website.
6. Reset the speaker: If none of the above steps resolve the issue, you can try resetting the speaker to its factory settings. Refer to the user manual or the Ultimate Ears support website for instructions on how to perform a reset.
If the problem persists even after trying these troubleshooting steps, it might be a hardware issue, and it's recommended to contact Ultimate Ears customer support for further assistance.