Turtle Beach STEALTH-700-GEN-2 user manual

No, you cannot use the Turtle Beach Stealth 700 Gen 2 without the transmitter. The transmitter is necessary to connect the headset to your gaming console or PC. It facilitates the wireless connection and provides the necessary audio and chat functionality.

To sync the Turtle Beach Stealth 700 Gen 2 headset, follow these steps:
1. Ensure that the headset is in pairing mode by pressing and holding the Bluetooth button on the left earcup until the LED on the headset starts rapidly flashing blue.
2. On your console or device, go to the Bluetooth settings menu.
3. Enable Bluetooth on your console or device, then search for available devices.
4. Look for "STEALTH 700 GEN 2" in the list of available Bluetooth devices and select it.
5. If prompted, enter the default passcode "0000" (four zeros) to pair the headset.
6. Once successfully paired, the LED on the headset will turn solid blue, indicating a stable Bluetooth connection.
Note: The Stealth 700 Gen 2 headset supports simultaneous connections to both Xbox and Bluetooth devices. If you want to switch between them, ensure the Bluetooth device is turned off before using the headset with the Xbox console.

There could be several reasons why your Turtle Beach Stealth 700 Gen 2 headset is not pairing properly. Here are a few troubleshooting steps to try:
1. Make sure the headset is in pairing mode. Press and hold the Bluetooth button on the headset until you hear the pairing prompt.
2. Ensure that your Bluetooth device is compatible with the headset. Check the compatibility list provided by Turtle Beach to ensure your device is supported.
3. Verify that Bluetooth is enabled on your device and that it is not already connected to another Bluetooth device. If it is, disconnect the device and try pairing again.
4. Restart both your headset and the device you are trying to pair it with. Power off the headset, turn off Bluetooth on your device, wait a few seconds, then power everything back on and try pairing again.
5. Check for firmware updates for your headset. Visit the Turtle Beach website or use the Turtle Beach Audio Hub software to update your firmware, as outdated firmware can sometimes cause pairing issues.
6. Try pairing the headset with a different device to see if the issue is with the initial device you were trying to pair with.
If none of these steps solve the problem, it may be helpful to consult the Turtle Beach support team or refer to the user manual for further assistance.

On the Turtle Beach Stealth 700 Gen 2, the mode button serves different functions based on the platform you are using:
1. PlayStation 4: The mode button allows you to cycle between different audio presets, such as Signature Sound, Bass Boost, and Vocal Boost. Each preset enhances different aspects of the audio to suit your preference.
2. Xbox One and Xbox Series X/S: The mode button enables or disables the Xbox Wireless feature, allowing you to connect the headset wirelessly to your Xbox console.
3. PC and mobile devices: The mode button functions as an EQ toggle. It enables or disables Superhuman Hearing, a sound setting popular for enhancing in-game audio cues like footsteps and environmental sounds.
Please note that the specific functionalities may vary depending on firmware updates and individual settings.