Turtle Beach STEALTH-300P user manual

The Turtle Beach Stealth 300 takes approximately 3-4 hours to reach a full charge.

To set up the Turtle Beach Stealth 300P headset, follow these steps:
1. Connect the transmitter: Plug the USB transmitter into an available USB port on your PlayStation or PC.
2. Power on the headset: Slide the Power/Mode switch on the headset to the position "ON". You will hear a tone indicating the headset is powering on.
3. Pair the headset with the transmitter: Press and hold the Connect button on the USB transmitter for a few seconds until the LED indicator starts blinking rapidly. Then, press and hold the Power button on the headset until the headset's LED indicator starts blinking rapidly as well. The LED indicators on both the transmitter and headset should become solid once paired successfully.
4. Adjust the volume: Use the Volume Control wheel on the left earcup of the headset to adjust the audio volume to your preference.
5. Mic Monitoring (optional): If you want to enable or adjust the Mic Monitoring feature that allows you to hear your own voice while speaking, press and hold the Mic Monitoring button on the right earcup until you reach the desired level.
6. Adjust EQ settings (optional): You can customize your audio experience by downloading the Turtle Beach Audio Hub software on a compatible device. With the software, you can adjust and personalize the equalizer settings of the Stealth 300P headset.
Remember to check the user manual that comes with the product for any specific instructions or troubleshooting tips for your headset model.

The Stealth 300 is a wireless gaming headset, and like any wireless device, it requires a power source to function. The headset needs to charge because it contains a built-in rechargeable battery, which powers its internal components such as the speakers and wireless communication circuitry. Charging the headset ensures that it has enough power to operate wirelessly and provide audio output during gaming sessions.

Yes, the Turtle Beach Stealth 300 gaming headset requires charging. It comes with a built-in rechargeable battery, and you need to connect the headset to a power source using the included USB cable for charging.