TP-Link TL-WR841N user manual

The TP-Link TL-WR841N is a wireless N router that can support speeds of up to 300Mbps on the 2.4GHz frequency band.

To access the admin panel of your TP-Link TL-WR841N router, follow these steps:
1. Connect your device (computer or smartphone) to the router either via Ethernet cable or Wi-Fi.
2. Open a web browser (such as Chrome, Firefox, or Edge) on your device.
3. In the address bar, type the default IP address for TP-Link routers: 192.168.0.1 or 192.168.1.1, and press Enter.
4. A login page will appear, prompting you to enter the username and password. The default username and password for most TP-Link routers are usually "admin" in lowercase. If you have changed these credentials before, enter the updated login details.
5. After entering the correct username and password, click on the "Login" or "Submit" button.
6. You will now be logged in to the TP-Link router's admin panel, where you can configure various settings, including wireless network settings, security, DHCP, port forwarding, etc.
Note: If the default IP address or login credentials don't work, you may have changed them in the past or your internet service provider uses a different IP address for their routers. In that case, you can check the router's manual or the underside of the router itself for the correct IP address and default login details.

The default IP address of the TP-Link TL-WR841N router is typically 192.168.0.1.

The default admin password for the TP-Link TL-WR841N router is "admin".