TP-Link TL-WA901ND user manual

The default IP address for the TP-Link TL-WA901ND in Access Point mode is typically 192.168.0.254. However, it's worth noting that this IP address can be changed during the setup process or if you have configured a different static IP for the device.

The default IP address for TP-Link TL-WA901ND is 192.168.0.254.

The default password for TP-Link WA901ND is admin.

To connect your TP-Link TL-WA901ND access point to a repeater, you can follow these steps:
1. Connect your TL-WA901ND to your computer using an Ethernet cable.
2. Make sure your computer is set to obtain an IP address automatically from the TL-WA901ND. You can do this by going to your computer's network settings and selecting "Obtain an IP address automatically" or "Obtain an IP address automatically using DHCP".
3. Open a web browser on your computer and type the default IP address of the TL-WA901ND into the address bar. The default IP address is usually '192.168.0.254'.
4. You will be prompted to enter a username and password. The default username and password for TP-Link devices are usually both set to 'admin'. If you have changed these credentials previously, use the updated login details.
5. Once logged in to the TP-Link TL-WA901ND web interface, navigate to the "Wireless" or "Wireless Settings" section.
6. Locate the "Wireless Mode" or "Operation Mode" option and select "Repeater" or "Universal Repeater" mode.
7. Search for available wireless networks in the vicinity. Select the wireless network you want to repeat, and enter the password if required.
8. Click on the "Save" or "Apply" button to save the settings.
9. Disconnect the Ethernet cable connecting your computer and the TL-WA901ND.
10. Move the TL-WA901ND to a location where it can effectively repeat the wireless signal.
11. Power on the TL-WA901ND and wait for it to connect to the existing wireless network.
Once the connection is established, the TL-WA901ND will act as a repeater, extending the wireless signal of the main network.