TP-Link TL-WA855RE user manual

To access the settings of your TP-Link TL-WA855RE Wi-Fi Extender, follow these steps:
1. Connect your computer or mobile device to the Wi-Fi network transmitted by the TP-Link extender (e.g., TP-Link_Extender).
2. Launch a web browser on your connected device.
3. In the address bar, enter the default IP address of the extender: 192.168.0.254 or tplinkrepeater.net. Press Enter.
4. You will be directed to the login page of the TP-Link extender.
5. Enter the default username and password. The default username is admin, and the default password is also admin. Press Enter or Log In.
6. You should now have access to the TP-Link extender's web-based interface, where you can configure its settings, such as network name (SSID), Wi-Fi password, channel, etc.
Note: If the default IP address or login credentials mentioned above do not work, it's possible that your extender's settings have been modified or that you have a different model. In this case, consult the product documentation (usually available on the TP-Link website) or contact TP-Link's support for further assistance.

The TL-WA855RE is a Wi-Fi range extender that supports a maximum wireless speed of up to 300Mbps.

To set up a TP-Link TL-WA855RE extender without using an Ethernet cable, follow these steps:
1. Start by plugging the extender into a power outlet near your Wi-Fi router.
2. Wait for the extender's LED light to turn solid blue or green. This indicates that it's ready for setup.
3. On your Wi-Fi-enabled device, go to your wireless network settings.
4. Look for the Wi-Fi network named "TP-Link_Extender_XXXXXX" (XXXXXX represents the last six characters of your extender's MAC address).
5. Connect to the extender's network, then open a web browser on your device.
6. In the address bar, type "tplinkrepeater.net" or "192.168.0.254" and press Enter.
7. You'll be redirected to the TP-Link extender's setup page.
8. Choose your desired language and click "Start."
9. The extender will search for available Wi-Fi networks. Select your home Wi-Fi network from the list, then click "Next."
10. Enter your Wi-Fi network's password, then click "Next."
11. You can customize the extender's network name (SSID) and password on the next page, or keep the defaults. Click "Next" when you're ready.
12. Review the settings on the next page, then click "Finish" to complete the setup.
13. Once the extender finishes rebooting, you can disconnect it from the power outlet and move it to a desired location within the range of your router's Wi-Fi signal.
14. Plug the extender back into a power outlet in your preferred location.
15. Wait for the extender's LED light to indicate a stable connection. It may take a few minutes.
16. Connect your Wi-Fi devices to the extended network using the new SSID and password you set up.
Now, your TP-Link TL-WA855RE extender is successfully set up without using an Ethernet cable.

The default password for the TP-Link TL-WA855RE range extender is usually admin.