TP-Link TL-SG105 user manual

The TP-Link TL-SG105 is a Gigabit Ethernet switch, capable of providing data transfer speeds of up to 1000 Mbps (1 Gbps) over each of its 5 Ethernet ports. This makes it suitable for high-speed networking in small office or home environments.

The default IP address of the TP-Link TL-SG105 is 192.168.0.1.

The lights on a TP-Link Ethernet switch indicate the status and activity of the ports and the switch itself. Here is the general meaning of the lights on a TP-Link Ethernet switch:
1. Power LED: Indicates that the switch is receiving power.
2. System LED: This light indicates the operational status of the switch. It usually turns solid green when the switch is functioning properly.
3. Link/Act LED: Each port on the switch has a Link/Act LED. The LED will be lit if a network cable is properly connected and transmitting data. It may blink when there is data activity. If the LED is off, it means there is no link detected or the port is not active.
4. Speed LED: Some switches have an additional Speed LED on each port. The LED may turn green if the port is connected to a device with a 1000Mbps (Gigabit) connection or an amber color for a 10/100Mbps connection.
Note that the exact configuration and behavior of the lights might vary slightly between different models and generations of TP-Link Ethernet switches. It is advisable to consult the user manual or documentation specific to your switch for accurate information.

The TP-Link TL-SG105 and TL-SG105E are both Ethernet switches manufactured by TP-Link. However, there are a few key differences between the two models:
1. Management: The TL-SG105 is an unmanaged switch, meaning it operates as a plug-and-play device without any configuration options. On the other hand, the TL-SG105E is a managed switch that allows for greater control and customization. It offers features such as VLAN (Virtual Local Area Network) support, QoS (Quality of Service) settings, and port mirroring.
2. Port Control: The TL-SG105E has advanced port control options. It supports port-based and 802.1Q tag-based VLANs, allowing you to divide your network into different virtual networks for increased security, efficiency, and flexibility. Additionally, it offers the ability to prioritize or limit bandwidth to specific ports or VLANs using QoS settings.
3. Monitoring: The TL-SG105E offers basic monitoring features, including SNMP (Simple Network Management Protocol) monitoring, which allows network administrators to monitor and manage the switch remotely. It also supports port mirroring, enabling the monitoring of specific network traffic for troubleshooting or analysis.
4. Price: Due to its additional management features, the TL-SG105E is typically priced slightly higher than the TL-SG105.
Overall, if you require a basic, plug-and-play switch without the need for advanced management or customization options, the TL-SG105 would be suitable. However, if you need more control over your network, such as creating VLANs or setting QoS policies, the TL-SG105E would be a better choice.