Titan TTB351VAC user manual

Titan vacuums are made by Tacony Corporation, a company based in St. Louis, Missouri, USA. They are a leading manufacturer and distributor of home appliances and cleaning products.

There could be a few reasons why your Titan Hoover is blowing out dust. Here are some possible causes:
1. Clogged Filters: If the filters in your vacuum cleaner are clogged with dust, it can cause the vacuum to blow out dust instead of properly trapping it. Check and clean or replace the filters as necessary.
2. Full Dust Bag or Canister: If the dust bag or canister is full, it can cause dust to be blown out. Empty the dust bag or canister and ensure it is properly seated in the vacuum.
3. Leaks or Loose Seals: If there are any leaks or loose seals in the vacuum cleaner's components, dust can escape instead of being properly contained. Inspect the vacuum for any potential leaks or loose parts and tighten or repair them as needed.
4. Brush Roll or Airway Blockage: A blockage in the brush roll or airway can cause dust to be blown out. Remove any obstructions or debris from the brush roll, hose, or other parts that may be causing a blockage.
5. Worn Parts or Damage: Over time, parts of the vacuum cleaner may wear out or become damaged, resulting in the escape of dust. Check for any worn-out components, such as seals, hoses, or filters, and replace them if necessary.
If the issue persists after trying these solutions, it may be beneficial to contact the manufacturer or a professional vacuum cleaner repair service for further assistance.

No, the Titan TTB351VAC is a vacuum cleaner that requires the use of a bag. The bag is necessary to collect and contain the dirt and debris that is suctioned into the machine. Attempting to use the Titan Hoover without a bag may result in damage to the vacuum or a decrease in its performance.