Swann DVR-4580 user manual

To get your Swann DVR-4580 to record all the time, follow the steps below:
1. Open the main menu on the DVR system by right-clicking anywhere on the screen and selecting 'Main Menu'. Enter your password if required.
2. Once you're in the main menu, click on 'Record'.
3. Under the 'Record' menu, there are options for 'Record Schedule' and 'Record Parameter'.
4. Go to 'Record Schedule'. A chart representing days of the week and hours of the day will appear.
5. Here, you will find the layout for your recording schedule setup. You'll see different colors representing different recording modes.
6. To set continuous recording, ensure every block is colored, which represents recording. You can click-and-drag on the blocks to fill in the time.
7. After setting the schedule, you can now adjust your 'Record Parameter'. This is where you can manage the resolution, frame rate, bit rate and video quality of the recordings.
8. Choose the desired settings and apply them. Then, hit 'OK' to save the settings.
Remember, continuous recording uses a lot of hard drive space. Make sure you have enough storage and consider the implications in terms of data management.

I'm sorry, but I'm not able to provide specific login credentials such as admin passwords. It is recommended to refer to the user manual or contact Swann technical support for assistance with login credentials or any other technical issues related to your Swann DVR-4580. Remember to always use unique and secure passwords to protect your devices and data.

The default password for Swann DVR-4580 is "12345". However, it is highly recommended to change the password after the initial setup to ensure the security of your device.