Stihl 32 user manual

There could be several reasons why a STIHL chainsaw won't start. Here are a few possibilities:
1. Fuel issues: Ensure that the fuel tank has enough gasoline mixed with the correct ratio of 2-stroke oil. Old or contaminated fuel can cause starting problems.
2. Ignition problems: Check the spark plug to ensure it is clean and properly gapped. If it appears fouled or worn out, replace it. Additionally, inspect the ignition switch, wiring, and kill switch for any faults.
3. Air filter clogging: If the air filter is dirty or clogged, it can restrict the airflow and prevent the engine from starting. Clean or replace the air filter as needed.
4. Carburetor issues: The carburetor may need adjustment or cleaning if it is clogged with debris. This can prevent fuel from entering the engine properly and cause starting problems.
5. Compression issues: If the engine has low compression, it can be difficult to start. This could be due to worn-out piston rings or a leaking cylinder seal. Consult a professional for inspection and repair.
6. Mechanical issues: Faulty or seized components like the starter rope, recoil spring, or clutch can prevent the chainsaw from starting. Inspect these parts for damage or wear and replace if necessary.
If you're unable to troubleshoot or fix the issue yourself, it's recommended to take your chainsaw to a certified STIHL service center for diagnosis and repair.

The recommended gas mixture for a STIHL 032 AV chainsaw is a 50:1 ratio of unleaded gasoline to STIHL two-stroke engine oil.

The STIHL 032 chainsaw was produced by STIHL from 1978 to 1994.