Sony SBH20 user manual

To pair your Sony SBH24 Bluetooth headset with a device, follow these steps:
1. Ensure that your SBH24 headset is charged and powered on.
. On the device you want to pair with, go to the Bluetooth settings. This is usually found under the device's Settings menu.
3. Enable Bluetooth on your device if it's not already turned on.
4. On the Bluetooth settings screen, you should see a list of available devices. Look for "SBH24" or a similar name representing your headset.
5. Tap on the name of your SBH24 headset in the list.
6. Your device will attempt to connect to the headset. If prompted, enter the default pairing code or PIN, which is usually "0000" or "1234".
7. Once your device successfully pairs with the SBH24 headset, you should see a confirmation message or an indicator that the connection is established.
Note: The exact steps may slightly vary depending on your device's operating system and version. It's always recommended to refer to the device's user manual for precise instructions.

To pair your Sony SBH20 with a device, follow these steps:
1. Turn on the SBH20 by pressing and holding the Power button until the indicator light turns on. It will flash blue and red to indicate that it's in pairing mode.
2. On your device, make sure Bluetooth is enabled. Go to the Bluetooth settings menu.
3. Scan for devices. Your device should detect the SBH20 as "Sony SBH20" or something similar.
4. Tap on the SBH20 to connect. If prompted, enter the default PIN code, which is usually "0000" or "1234". You can refer to the device's user manual for the exact PIN code.
5. Once connected, the indicator light on the SBH20 will turn solid blue, indicating that the pairing process was successful.
Your Sony SBH20 is now paired with your device, and you can start using it for audio playback and hands-free calling via Bluetooth.