Sony CYBERSHOT-DSC-HX60 user manual

To connect your Sony DSC HX60 to your phone, follow these steps:
1. Make sure that your camera's Wi-Fi function is enabled. You can do this by accessing the camera's menu settings and locating the Wi-Fi option.
2. On your phone, go to the settings menu and enable Wi-Fi.
3. Open the PlayMemories Mobile app on your phone. If you do not have it installed, you can download it from the App Store (for iOS devices) or Google Play Store (for Android devices).
4. On your camera, press the dedicated Wi-Fi button or access the Wi-Fi option in the menu.
5. The camera will display a screen with the SSID (Wi-Fi network name) and password.
6. On your phone, find the SSID displayed on your camera in the Wi-Fi settings and connect to it.
7. Once connected, return to the PlayMemories Mobile app on your phone. It should detect the camera automatically. If not, manually select the camera from the app's list of available devices.
8. Follow the on-screen instructions in the app to establish a connection.
Once connected, you will be able to transfer photos and videos wirelessly between your camera and phone, use your phone as a remote control for the camera, and more, using the features provided by the PlayMemories Mobile app.

There could be several reasons why your Sony Cybershot DSC-HX60 is not working. Some common issues and troubleshooting steps include:
1. Battery: Ensure that the battery is properly inserted and charged. Try charging the battery again or using a different one if available.
2. Power switch: Make sure the power switch is in the ON position. Sometimes, it may be accidentally set to OFF.
3. Memory card: Check if a memory card is inserted properly. If not, reinsert it and make sure it is compatible with the camera.
4. Camera firmware: Check for any firmware updates available for your camera on the Sony support website. Updating the camera firmware can often resolve software-related issues.
5. Reset settings: Try resetting the camera settings to default by accessing the camera menu and selecting the "Reset" or "Initialize" option. Note that this will reset all settings back to factory defaults.
6. Lens obstruction: Ensure that the lens is clean and free from any obstructions. If there is any dirt or debris, gently clean it using a soft, lint-free cloth.
7. Camera error messages: If you see any error messages on the camera screen, refer to the user manual or contact Sony customer support for assistance.
If none of these steps resolve the issue, it may be best to contact Sony customer support or bring the camera to an authorized service center for professional assistance.

To charge your Sony Cyber-shot DSC HX60 camera, follow these steps:
1. Locate the battery compartment on the bottom of your camera.
. Slide open the battery compartment cover.
3. Take out the rechargeable battery from the camera by pushing the battery lock lever towards the unlock symbol and lifting the battery out.
4. Connect the supplied micro USB cable into the camera's micro USB port. The port is typically located on the side or back of the camera.
5. Plug the other end of the micro USB cable into a power source, such as a wall adapter or a computer USB port.
6. The camera should start charging once it's connected to the power source.
Note: Some camera models may come with a separate battery charger. In that case, you need to remove the battery from the camera and insert it into the charger. Then, connect the charger to a power source to charge the battery. Consult your camera's manual for specific instructions.

To transfer photos from your Sony Cybershot DSC-HX60 camera to your computer, you can follow these steps:
1. Turn on your camera and computer.
. Connect your camera to your computer using the USB cable that came with the camera.
3. On your camera, select "Transfer Mode" or "Computer" from the menu options that appear on the screen.
4. On your computer, the operating system should detect the camera and it will prompt you with options. Select the one that allows you to view and transfer files.
5. If a prompt does not appear, you can manually access the camera's storage by opening the "File Explorer" (Windows) or "Finder" (Mac).
6. In the file explorer or finder, locate your camera's storage device. It should be listed as a connected device.
7. Open the camera's storage device, and you should find your photos and videos.
8. Select the photos you want to transfer, and then either drag and drop them to a specific folder on your computer or use the copy/paste function.
9. Wait for the files to finish copying or transferring to your computer. Once the transfer is complete, you can disconnect the USB cable.
Note: Some computers may require you to install specific software for the camera to be recognized. In that case, follow the on-screen instructions to install the necessary software or drivers before proceeding with the steps above.