Sony BRAVIA-KDL-40EX400 user manual

If you don't have the remote control for your Sony Bravia TV, you can still access the menu by using the physical buttons located on the TV itself. The button placement may vary slightly depending on the specific model, but the general process is as follows:
1. Look for a set of physical buttons on the side or bottom of your TV. These buttons are usually concealed along the edge of the screen or in a small panel.
2. On most Sony Bravia TVs, there will be a power button and a set of arrow or navigation buttons. The navigation buttons typically include an "Enter" or "OK" button in the center, along with directional arrow buttons surrounding it.
3. Press the arrow buttons to navigate through the menu options. The up and down arrows are used to select different menu items, while the left and right arrows are used to adjust settings within each menu item.
4. Once you have highlighted the desired menu option, press the "Enter" or "OK" button to select it.
5. To exit the menu, you can either look for an "Exit" or "Return" button on your TV's control panel, or you can simply press the power button to turn off the TV.
Remember, the exact button placement and functionality may vary depending on your Sony Bravia TV model. Consult your TV's manual or the manufacturer's website for specific instructions or diagrams if needed.

To find hidden channels on your Sony Bravia TV, you can try the following steps:
1. Press the "Menu" button on your remote control.
. Navigate to the "Settings" or "Setup" option using the arrow keys on your remote.
3. Look for an option called "Channel Setup" or "Channel Scan" and select it.
4. Choose the "Antenna" or "Cable" option depending on your TV setup.
5. Select the "Auto Program" or "Auto Scan" option to scan for all available channels.
6. Wait for the TV to finish scanning, which may take a few minutes.
7. Once the scan is complete, your TV will display a full list of available channels, including any hidden channels that were detected.
Note that the process may slightly vary depending on the specific model and firmware version of your Sony Bravia TV. If you're unable to find hidden channels using the above steps, you can refer to the user manual or contact Sony customer support for further assistance.

KDL is a model prefix used by Sony for their LCD televisions. In this case, it refers to the specific model of the Sony TV, "Bravia KDL-40EX400". The KDL prefix is mainly used to identify Sony's line of LCD TVs.