Singer SIMPLE-3116 user manual

There could be several reasons why your Singer sewing machine is not starting. Here are some common troubleshooting steps you can try:
1. Check the power supply: Ensure that the sewing machine is properly plugged into a functioning power outlet. If the power cord is damaged, try replacing it.
2. Check the power switch: Make sure the power switch is turned on. Some models may have a separate switch for the sewing machine and the light, so check both switches.
3. Check the foot control: Ensure that the foot control pedal is correctly connected and functional. Sometimes, a loose or damaged pedal can prevent the machine from starting.
4. Re-thread the machine: Improper threading of the machine can cause it not to start. Follow the instruction manual to correctly thread the machine, including the needle, bobbin, and thread guides.
5. Bobbin or needle issues: Examine the needle to ensure it is not bent or broken. Also, check the bobbin for any thread jams or tangles. Clean out the bobbin case if needed.
6. Tension adjustments: Incorrect tension settings can prevent the machine from starting. Experiment with adjusting the upper thread and bobbin tension to find the appropriate settings for your fabric.
7. Motor or internal issues: If none of the above steps work, there could be a problem with the machine's motor or internal components. In this case, it may be necessary to consult a professional for repair or service.
Remember to always refer to your Singer sewing machine's instruction manual for specific troubleshooting steps and guidelines.

The specific setting required for a Singer sewing machine may vary depending on the specific model and type of sewing project. However, generally, when starting a sewing project on a Singer sewing machine, it is recommended to set the machine to the following settings:
1. Straight Stitch: Set the machine to the straight stitch setting, which is often indicated by a straight line or a number "1" on the stitch selector dial.
2. Stitch Length: Set the stitch length to an appropriate level, usually between 2-3 on the stitch length dial. This can be adjusted depending on the type of fabric and desired outcome.
3. Thread Tension: Ensure that the thread tension dial is set to a balanced position, usually around the middle of the tension range. You may need to adjust the tension based on the fabric thickness. For finer fabrics, you may need to lower the tension, while for heavier fabrics, you may need to increase it slightly.
4. Needle Position: Set the needle to the desired position, whether it is in the center, left, or right, depending on the sewing requirements.
Always consult the instruction manual provided with your Singer sewing machine for specific guidance on the appropriate settings for your model.