Sennheiser MOMENTUM-3-WIRELESS user manual

To pair your Sennheiser Momentum 3 Wireless, follow these steps:
1. Turn on your Momentum 3 headphones by pressing and holding the power button located on the right earcup until the LED indicator starts flashing blue and white.
. Make sure Bluetooth is enabled on your device (phone, tablet, or computer), and put it into Bluetooth pairing mode. Refer to your device's user manual if you are unsure how to enter pairing mode.
3. On your device, go to the Bluetooth settings and search for available devices. You should see "Sennheiser Momentum 3" or a similar name listed.
4. Tap or select "Sennheiser Momentum 3" to connect. If asked for a PIN or passkey, enter "0000" (four zeros).
5. Once the pairing is successful, you will hear a voice prompt or a chime in the headphones, and the LED indicator will turn solid blue.
Your Sennheiser Momentum 3 headphones are now paired and ready to use with your device. Keep in mind that the exact pairing process may vary slightly depending on your specific device.