Samsung SNH-1011N user manual

The default password for the Samsung SNH-1011N SmartCam is "admin".

If your Samsung SmartCam, model SNH-1011N, is flashing blue, there could be a few possible reasons:
1. Wi-Fi Connection: The blue flashing light could indicate that the SmartCam is trying to establish a Wi-Fi connection. Ensure that your Wi-Fi network is properly configured and that the camera is within range of the network. Check the SmartCam's settings to ensure it is connected to the correct Wi-Fi network.
2. Network Issues: If there are network connectivity issues, such as a weak Wi-Fi signal or a problem with your internet service provider, the SmartCam may flash blue. Verify that your internet connection is working properly and that other devices can connect to the network without any issues.
3. Firmware Update: Sometimes, a blue flashing light on the SmartCam can indicate that a firmware update is in progress. Ensure that the camera has the latest firmware installed by checking for updates in the SmartCam's settings. If an update is available, follow the instructions to install it.
4. Power Issues: If the SmartCam is not receiving proper power, it might flash a blue light. Ensure that the camera is properly plugged into a power source and that there are no loose connections or power supply issues.
If none of these steps resolve the issue and the blue flashing light persists, it would be advisable to consult the user manual or contact Samsung customer support for further assistance.

To set up your Samsung SNH-1011N Wisenet SmartCam, follow these steps:
1. Begin by downloading and installing the SmartCam app on your smartphone or tablet. You can find the app in the App Store (for iOS devices) or Google Play Store (for Android devices).
2. Once the app is installed, open it and create a new account or sign in if you already have one.
3. Connect your SmartCam to a power source using the provided power adapter.
4. Press and hold the reset button on the back of the camera for about 5 seconds. The camera will emit a series of beeps, indicating that it has been reset.
5. Open the SmartCam app and tap on the "+" or "Add New Camera" icon to add a new device.
6. The app will prompt you to select your camera model. Choose "SNH-1011N" from the list.
7. Next, follow the on-screen instructions to connect your camera to your Wi-Fi network. Make sure your smartphone or tablet is connected to the same Wi-Fi network you want to connect your camera to.
8. The app will display a QR code on your screen. Hold your smartphone or tablet in front of the camera lens, about 5-10 inches away, to scan the QR code. This will transfer your Wi-Fi network settings to the camera.
9. Once the camera scans the QR code successfully, it will attempt to connect to your Wi-Fi network. Wait for a few moments until the connection is established.
10. The app will prompt you to add a name for your camera and set a password for its live viewing. Enter the desired information and tap the "Finish" or "Done" button.
11. Your Wisenet SmartCam is now set up and ready to use. You can view live video feeds, adjust settings, and access additional features through the SmartCam app.
Note: It's recommended to consult the user manual that came with your Samsung SNH-1011N Wisenet SmartCam for detailed instructions and troubleshooting tips.