Samsung DW80R9950UG user manual

There could be several reasons why your Samsung dishwasher is not working. Here are some possible causes and solutions:
1. Power supply: Check if the dishwasher is properly connected to a power source and if the circuit breaker has not tripped. Ensure the outlet is functioning properly.
2. Door latch: Make sure the dishwasher door is securely closed and the door latch is engaging properly. If not, the dishwasher may not start.
3. Control panel settings: Verify that the control panel is set to the desired wash cycle, and the delay start or child lock functions are not activated.
4. Water supply: Ensure that the water supply valve connected to the dishwasher is turned on. Check for any obstructions in the water inlet or supply hose.
5. Filters and spray arms: Clean the filters and check if the spray arms are not clogged or damaged. If they are, clean or replace them as necessary.
6. Error codes: Look for any error codes displayed on the dishwasher's control panel. Consult the user manual or contact Samsung customer support for assistance in deciphering the error code and resolving the issue.
If none of these solutions resolve the problem, it is recommended to contact Samsung customer support or a qualified technician for further assistance.

To remove the upper rack on a Samsung DW80R9950UG dishwasher, follow these steps:
1. Empty the upper rack of any dishes or items.
2. Locate the rack-adjuster assembly at the sides of the dishwasher. There are usually two clips on each side.
3. To release the clips, push them towards the center of the dishwasher. You may need to use some force or a flat-head screwdriver to push the clips in.
4. Once the clips are released, slowly pull the rack straight outwards from the dishwasher. Be careful not to tip it or let it drop suddenly.
5. If the rack seems to get stuck while pulling it out, check for any screws or additional locking mechanisms that may still be holding it in place. Remove them if necessary.
6. Once the upper rack is completely removed, you can clean or perform any desired maintenance. To reinstall the rack, simply reverse the steps above, sliding it back into place and ensuring the clips lock securely.
Make sure to consult your dishwasher's user manual for any specific instructions or precautions mentioned by Samsung.

The Samsung DW80R9950UG dishwasher requires a connection to a hot water supply with a temperature range of 120-150°F (49-66°C). It is recommended to use a minimum of 120°F (49°C) for optimal performance and efficient cleaning. Additionally, please ensure that your water pressure falls within the recommended range of 20-120 psi (138-827 kPa).