Sage KAFFEEMASCHINEN user manual

There could be several reasons your Sage coffee machine steamer is not working:
1. Clogged Steamer: Over time, the steamer can get clogged due to the build-up of milk proteins and minerals from the water. Use a needle or pin to clear the steam wand tip. Follow up by using the steam function to clear any remaining debris.
2. Insufficient Water: Make sure that there is enough water in the water tank. If the water level is too low, the machine won't be able to generate steam.
3. Machine Needs Descaling: The build-up of limescale can affect the performance of the machine and cause blockages. You may need to descale your machine.
4. Faulty Thermostat: The machine's thermostat might be broken and not heating the water to create steam. This would require professional repair.
5. Pump Issue: If the machine is not building up proper pressure, the pump might be faulty, which also would require professional repair.

Consult your user manual for specific instructions on cleaning and troubleshooting, or contact Sage customer service for further help.

There could be several reasons why the power light is flashing on your Sage coffee machine. Here are a few possibilities:
1. Water level: Check if the water tank is empty or if the water level is below the minimum mark. If the machine detects a low water level, it may flash the power light to indicate that it cannot brew coffee.
2. Coffee bean hopper: If you have a bean-to-cup machine, verify if the coffee bean hopper is empty or if the beans are not feeding properly. Insufficient beans can cause the power light to flash.
3. Drip tray or waste container: Some coffee machines have sensors that detect a full drip tray or waste container. If either of these containers is full, the power light may flash to remind you to empty them.
4. Brew unit or grinder: In case the brew unit or grinder is jammed or not properly inserted, it could trigger a warning light to flash. Check the user manual for instructions on how to troubleshoot this issue.
5. General malfunction: If none of the above issues apply, there might be a general malfunction with the machine. In this case, it is advisable to contact the manufacturer's customer support or refer to the user manual for further assistance.
Remember to consult your specific model's user manual for more precise troubleshooting instructions, as the exact reasons for a flashing power light can vary between different Sage coffee machine models.