Russell Hobbs KAFFEEMASCHINEN user manual

To descale your Russell Hobbs coffee maker, you can follow these steps:
1. Ensure that the coffee maker is unplugged and cooled down.
. Remove the coffee filter and any coffee grounds or leftover water from the machine.
3. Fill the water tank with a mixture of equal parts white vinegar and water. The amount of mixture needed will depend on the size of your coffee maker, so refer to the instruction manual for guidance.
4. Place a carafe or coffee pot under the coffee maker's brew basket to collect the descaling solution.
5. Plug in the coffee maker and turn it on to start the brewing process. Allow a few cups of the descaling solution to brew into the carafe.
6. Once the brew cycle is complete, turn off the coffee maker and let it sit for about 15 minutes to allow the descaling solution to work.
7. After 15 minutes, turn the coffee maker back on and let it complete the brewing cycle.
8. Empty the carafe and discard the descaling solution.
9. Rinse the coffee maker thoroughly by filling the water tank with clean water and running a brew cycle without any coffee grounds or filter.
10. Repeat the rinse process until the vinegar smell is no longer present.
11. Clean the coffee maker's external surfaces using a damp cloth.
12. Reassemble the coffee maker, ensuring all parts are dry, and it is ready for use.
Remember to consult the instruction manual specific to your Russell Hobbs coffee maker, as the descaling process may vary slightly based on the model.

To set the time on a Russell Hobbs coffee maker, follow these steps:
1. Make sure the coffee maker is plugged in and turned on.
. Look for a button or a combination of buttons that controls the clock function. This may vary depending on the model, so refer to the user manual if needed.
3. Press and hold the corresponding button(s) until the display starts blinking or indicating that you are in clock setup mode.
4. Use the buttons or knobs dedicated to setting the time to adjust the hours and minutes. Typically, there will be separate buttons for hour and minute adjustments.
5. Once you have set the desired time, release the button(s) and the clock should be set.
6. Double-check the time on the display to ensure it is correct.
7. If your coffee maker has a start-delay feature, make sure to adjust that separately if desired.
If you can provide the specific model of your Russell Hobbs coffee maker, I can provide more detailed instructions tailored to your model.