Roberts REVIVAL-ISTREAM-3 user manual

To connect your Roberts Bluetooth device, follow these steps:
1. Make sure the Bluetooth feature on your device is enabled. This is usually found in the Settings menu of your device.
2. Press and hold the Bluetooth button on your Roberts revival-istream-3 until the Bluetooth indicator starts flashing. This puts your Roberts device into pairing mode.
3. On your smartphone, tablet, or computer, go to the Bluetooth settings and search for available devices. The name of your Roberts device should appear in the list. Usually, it will be something like "Roberts Revival-istream-3".
4. Select the Roberts device from the list to start the pairing process. Depending on your device, you might be prompted to enter a PIN code. If required, enter "0000" or "1234", as these are commonly used default codes.
5. Once the pairing is successful, you will see a notification on your device, and the Bluetooth indicator on your Roberts device will stop flashing and remain solid.
6. Your Roberts device is now connected to your smartphone, tablet, or computer via Bluetooth. You can play audio from your device, and it will be transmitted to your Roberts Bluetooth device.
Remember that the specific steps may slightly vary depending on the device you're using. It's always a good idea to refer to the user manual of your Roberts revival-istream-3 for detailed instructions.

To set up Roberts iStream 3, please follow the steps below:
1. Position your iStream 3 near an electrical outlet and ensure a stable internet connection.
2. Plug in the power cord into the back of the radio and connect the other end to a wall outlet.
3. Turn on the radio by pressing the power button located on the top panel.
4. The device will display a setup screen prompting you to select a language. Use the arrow buttons to navigate and press the OK button to confirm your selection.
5. The next screen will display a list of available Wi-Fi networks. Use the arrow buttons to select your preferred network, and press the OK button.
6. If your network requires a password, a screen will prompt you to enter it using the number and letter buttons on the radio. Use the arrow buttons to move between characters, and press the OK button to confirm each character. Once you have entered your password, press OK to connect to the network.
7. After successfully connecting, the radio will display a screen with an automatically generated name. You can rename the radio if desired.
8. Use the arrow buttons to choose your preferred location settings (time format, time zone, etc.), and press OK to confirm.
9. The iStream 3 radio will now attempt to connect to the internet and update its software if necessary. This process may take a few minutes.
10. Once the update is complete, you will be taken to the main menu screen. From here, you can explore various functions such as internet radio, DAB, FM, Spotify Connect, etc.
You have now successfully set up your Roberts iStream 3. Enjoy exploring its features and streaming your favorite content!

There could be several reasons why your Roberts radio is not connecting to the internet. Here are a few troubleshooting steps you can try:
1. Check your Wi-Fi network: Make sure that your Wi-Fi network is working properly and other devices can connect to it. Restart your router and try reconnecting your radio.
2. Check your radio's Wi-Fi settings: Ensure that the Wi-Fi settings on your Roberts radio are correctly configured. Check if you are using the correct network name (SSID) and password.
3. Signal strength: Ensure that your radio is within the range of your Wi-Fi router. If the signal is weak, try moving your radio closer to the router to see if it establishes a connection.
4. Firmware update: Check if there are any available firmware updates for your radio. Updating the firmware may help resolve any compatibility issues with your Wi-Fi network.
5. Factory reset: If none of the above steps work, you can try performing a factory reset on your radio. Keep in mind that this will erase all settings and stored data, so you will need to set it up again from scratch.
If the problem persists, it might be best to contact the Roberts customer support for further assistance.

To connect your Roberts speaker, follow these steps:
1. Turn on your Roberts speaker and ensure it is in pairing mode. This is usually done by pressing and holding the Bluetooth or pairing button until the LED indicator starts blinking or you hear a voice prompt indicating it is in pairing mode.
2. On your audio source device (such as a smartphone or tablet), go to the settings menu and enable Bluetooth.
3. Once Bluetooth is enabled, your device will start searching for available Bluetooth devices. Look for the name of your Roberts speaker in the list of discovered devices.
4. Tap on the name of your Roberts speaker in the Bluetooth menu on your device to connect. You might be asked to enter a PIN or confirm a pairing code; refer to the user manual of your speaker for any specific instructions.
5. Once your speaker is successfully connected, you should see a confirmation message on your device's screen, and the LED indicator on the speaker may change to a solid or flashing light. Additionally, you may hear a voice prompt indicating a successful connection.
6. You can now play audio on your device, and it will be streamed to your Roberts speaker.
Remember, these steps may vary slightly depending on the specific model of Roberts speaker you have. Therefore, it is always a good idea to refer to the user manual provided with your speaker for detailed instructions specific to your device.