Pioneer AVH-P4000DVD user manual

To reset your Pioneer AVH-221EX, you can follow the steps below:
1. Turn off the receiver: Make sure the unit is completely turned off by pressing and holding the power button until the screen goes blank.
. Locate the reset button: On the front of the receiver, there should be a small pinhole or a labeled reset button. It is usually located near the bottom right or left side of the display.
3. Reset the unit: Insert a small pointed object (like a paperclip or toothpick) into the reset button or through the pinhole, and press and hold it for a few seconds. You should feel a slight click.
4. Power on the receiver: After releasing the reset button, turn on the receiver by pressing the power button again.
By following these steps, you should have successfully reset your Pioneer AVH-221EX receiver back to its factory default settings. Note that resetting the unit will erase any personalized settings or saved configurations, so you may need to reconfigure them after the reset.

No, the Pioneer AVH-P4000DVD does not have built-in Bluetooth capability.