Philips SHAVER-SERIES-5000-S5320 user manual

To reset your Philips Shaver Series 5000 S5320, you can follow these steps:
1. Ensure that the shaver is turned off and disconnected from the power source.
. Locate the small reset button on the bottom of the shaver. It is usually a small hole marked with "RESET."
3. Take a small and pointed object, such as a paperclip or a pen, and gently press and hold the reset button for a few seconds.
4. While holding the reset button, connect the shaver to the power source (either plug it in or put it on the charging dock).
5. Continue holding the reset button for a few seconds until the shaver displays some activity or the reset is confirmed. This may include lights turning on or a vibration.
6. Release the reset button and disconnect the shaver from the power source.
7. Your Philips Shaver Series 5000 S5320 should now be reset to its default settings.
Note: Resetting the shaver will erase any personalized settings you have made, and it will revert to the factory default settings.

There can be several reasons for your Philips shaver to stop working. Here are a few possible causes:
1. Battery Issues: If your shaver is battery-operated, the battery may be discharged or faulty. Check if the battery needs to be recharged or replaced.
2. Power Supply Problems: If your shaver is corded, ensure that it is properly connected to a working power outlet. Check if the power cord is damaged or loose.
3. Blocked Cutter Heads: Over time, the cutter heads of the shaver can become clogged with hair or debris, affecting its functionality. Clean the blades and remove any obstacles that may be blocking them.
4. Motor Malfunction: The motor of the shaver may have encountered a problem. In such cases, it is recommended to contact Philips customer support or take it to a service center for diagnosis and repair.
5. Water Damage: Philips shavers are typically water-resistant, but excessive exposure to water or submerging the shaver can result in damage. If your shaver has come into contact with water, it may have short-circuited or suffered internal damage.
If none of the above solutions solve the issue, reaching out to Philips customer support or referring to the product's user manual for troubleshooting guidance is recommended.

To unlock your Philips 5000 shaver, you can follow these steps:
1. Make sure the shaver is turned off.
. Press and hold the power button for about 3 seconds until the lock symbol/icon on the display disappears. This will indicate that the shaver is now unlocked.
3. Once unlocked, you can turn on the shaver like normal by pressing the power button.
Note: The method to unlock may vary slightly depending on the exact model of your Philips 5000 shaver. However, generally, holding down the power button for a few seconds should unlock it. If this method doesn't work for your specific model, consult the user manual that came with your shaver for detailed instructions.

The Philips Shaver Series 5000 S5320 takes approximately 1 hour to fully charge.