Philips SHAVER-SERIES-5000-S5110 user manual

To reset your Philips Shaver Series 5000 model S5110, you can follow these steps:
1. Make sure your shaver is turned off.
. Remove the shaving head unit by pressing the release button on the back of the shaver.
3. Check the small reset hole located at the bottom of the shaver.
4. Use a pointed object such as a toothpick or a paperclip to gently press and hold the reset button inside the hole for a few seconds.
5. Release the reset button and reattach the shaving head unit back onto the shaver.
6. Turn on the shaver and it should be reset to its default settings.
Note: Resetting your shaver may clear any customized settings you may have previously set, so make sure to reconfigure any personal preferences if needed.

There could be multiple reasons why your Philips electric shaver is not working. It is important to troubleshoot some common issues before seeking professional help.
1. Check the power source: Ensure that the shaver is properly plugged into a working electrical outlet or that the battery is charged if it is a cordless model.
2. Clean the shaver: Sometimes, a buildup of hair, oils, or product residues can obstruct the shaver's blades or motor. Clean the shaver thoroughly following the manufacturer's instructions.
3. Replace or recharge the battery: If your shaver is cordless and not turning on, it could be due to a depleted battery. Try recharging the battery or replacing it if needed.
4. Check the power switch or button: Inspect the power switch or button to see if it is functioning correctly. If it feels loose or sticky, it may need to be repaired or replaced.
5. Blade issues: If the shaver's blades are dull, damaged, or misaligned, it may not function properly. Replace the blades or consult the manufacturer for assistance.
6. Motor or internal components: If none of the above steps resolve the issue, there may be an internal problem with the motor or other components of the shaver. In this case, it is advisable to contact Philips customer support or take it to an authorized service center for repair.
It is important to note that these troubleshooting steps are general suggestions and may not solve every issue. It is always best to consult the user manual or reach out to Philips customer support for specific assistance with your device.

To unlock your Philips 5000 shaver, you can follow these steps:
1. Make sure the shaver is turned off.
. Press and hold the power button for about 3 seconds until the lock symbol/icon on the display disappears. This will indicate that the shaver is now unlocked.
3. Once unlocked, you can turn on the shaver like normal by pressing the power button.
Note: The method to unlock may vary slightly depending on the exact model of your Philips 5000 shaver. However, generally, holding down the power button for a few seconds should unlock it. If this method doesn't work for your specific model, consult the user manual that came with your shaver for detailed instructions.

The Philips shaver series 5000 S5110 has an LED indicator that shows the battery status. When the shaver is connected to a power source for charging, the LED light will blink, indicating that the device is charging. Once the shaver is fully charged, the LED light will remain steady or turn off, indicating a full charge. You can unplug the device and start using it once the LED light indicates a full charge.