Philips SERIES-5000-S5100 user manual

There could be multiple reasons why your Philips electric shaver is not working. It is important to troubleshoot some common issues before seeking professional help.
1. Check the power source: Ensure that the shaver is properly plugged into a working electrical outlet or that the battery is charged if it is a cordless model.
2. Clean the shaver: Sometimes, a buildup of hair, oils, or product residues can obstruct the shaver's blades or motor. Clean the shaver thoroughly following the manufacturer's instructions.
3. Replace or recharge the battery: If your shaver is cordless and not turning on, it could be due to a depleted battery. Try recharging the battery or replacing it if needed.
4. Check the power switch or button: Inspect the power switch or button to see if it is functioning correctly. If it feels loose or sticky, it may need to be repaired or replaced.
5. Blade issues: If the shaver's blades are dull, damaged, or misaligned, it may not function properly. Replace the blades or consult the manufacturer for assistance.
6. Motor or internal components: If none of the above steps resolve the issue, there may be an internal problem with the motor or other components of the shaver. In this case, it is advisable to contact Philips customer support or take it to an authorized service center for repair.
It is important to note that these troubleshooting steps are general suggestions and may not solve every issue. It is always best to consult the user manual or reach out to Philips customer support for specific assistance with your device.

To unlock a Philips Series 5000 Shaver, follow these steps:
1. Press and hold the 'ON/OFF' button for 3 seconds.
. After the 3 seconds, you should see an icon of a lock appearing or disappearing on the screen, indicating that the travel lock is turned on or off.
If this doesn't work, it's possible that your shaver doesn't have a travel lock feature. However, most recent models of Philips electric shavers do have this feature.
Please consult your user manual for specific instructions for your model.

The charging light on your Philips Series-5000-S5100 trimmer may blink for a few reasons:
1. Charging Indication: The blinking light usually indicates that the trimmer is being charged. It serves as an indication that the battery is receiving power and is being recharged. Once the battery is fully charged, the blinking should stop, and the light may remain solid or turn off.
2. Low Battery Notification: If the trimmer's battery level is critically low, the charging light may also blink to alert you that it needs to be recharged. In this case, connect the trimmer to the charging cable and let it charge until the light stops blinking.
3. Charging Error: If there is an issue with the charging process, such as a loose connection or a faulty charging cable, the charging light may blink to signal a charging error. Ensure that the trimmer is properly connected to the charging cable and that the cable is securely plugged into a power source. If the blinking persists, try using a different charging cable or contact Philips customer support for assistance.
4. Faulty Battery or Trimmed Head: In some cases, a blinking charging light could indicate a problem with the battery or the trimmer's head. If the charging light continues to blink despite trying different charging methods, it may be necessary to reach out to Philips customer support for further troubleshooting or repair options.
It is recommended to consult the user manual or contact Philips customer support for specific guidance related to your Philips Series-5000-S5100 trimmer model.

The blinking green light on the Philips Series-5000-S5100 trimmer indicates that the trimmer is charging. When you connect the device to a power source, the light begins to blink, indicating that the battery is being charged. Once the battery is fully charged, the light should become solid or turn off.