Philips FRITEUSEN user manual

To use your Philips Essential Airfryer, follow these steps:
1. Place the Airfryer on a stable, heat-resistant surface and plug it into an electrical outlet.
2. Preheat the Airfryer by turning the temperature dial to the desired temperature and setting the timer for 3-5 minutes. The optimal temperature and time settings may vary depending on the recipe you are preparing.
3. While the Airfryer is preheating, prepare your food. You can use fresh or frozen ingredients, such as fries, chicken wings, vegetables, or even baked goods.
4. Once the Airfryer is preheated, pull out the frying basket by using the handle. Make sure the basket is clean and dry.
5. Place your food in the frying basket in a single layer. Do not overcrowd the basket as it may affect the cooking performance.
6. Slide the frying basket back into the Airfryer until it clicks into place.
7. Set the desired cooking time by turning the timer dial. You can typically find recommended cooking times in the Airfryer's instruction manual or on the Philips website.
8. Adjust the temperature setting as needed, depending on the recipe. Most recipes will provide specific temperature recommendations.
9. During the cooking process, you can open the Airfryer by pulling the handle and checking on your food. This will pause the cooking process, and you can resume cooking by closing the Airfryer.
10. Once the cooking time is complete, the Airfryer will automatically turn off, and you will hear a beep. Carefully remove the frying basket using the handle.
11. Let the food cool for a few minutes before serving. Be cautious as the basket and the Airfryer may still be hot.
12. Clean the Airfryer by removing the basket and the pan, and wash them with warm, soapy water. Be sure to wipe the exterior of the Airfryer with a damp cloth.
Always refer to the specific instructions provided with your Philips Essential Airfryer as procedures may slightly vary depending on the model you own.

1. Ensure the air fryer is turned off and unplugged from the power source.
2. Let the air fryer cool down for a few minutes if just used to prevent accidents or burns.
3. Open the drawer by pulling the handle away from the machine.
4. Firmly grasp the handle of the basket, then gently and carefully lift it up to remove it from the drawer.
5. If the basket is stuck due to food particles, clean the drawer and the basket thoroughly before trying to remove it again. Please note that some Philips Air Fryers have a button that needs to be pressed to release the basket from the drawer.
Always refer to your Philips Air Fryer's manual for specific directions as the removal process may vary slightly depending on the specific model.

There could be several reasons why the timer is not working on your Philips air fryer. Some possible causes and solutions include:
1. Power issue: Make sure the air fryer is properly plugged in and receiving power. Check the electrical outlet and cord for any damage.
2. Incorrect timer settings: Ensure that you have set the timer correctly. Follow the instructions provided in the user manual to set the desired cooking time.
3. Defective timer: If the timer is not functioning at all, it could be a defect or malfunction. Contact the Philips customer support or the retailer where you purchased the product for assistance. They may provide troubleshooting tips or recommend repair or replacement options.
4. Mechanical or internal issue: There might be a mechanical problem or internal damage that is preventing the timer from working properly. In this case, it is best to reach out to Philips customer support for advice or have a professional technician examine the appliance.
It is always recommended to consult the user manual or contact the manufacturer for troubleshooting assistance specific to your model of Philips air fryer.

To connect your Philips air fryer to Wi-Fi, follow these steps:
1. Make sure your Philips air fryer is plugged in and turned on.
. Download and install the Philips Smart Kitchen app from the App Store or Google Play Store on your smartphone or tablet.
3. Open the app and create an account if it's your first time using it. If you already have an account, log in.
4. Once logged in, select "Add Device" or a similar option within the app.
5. The app will then scan for available devices. Make sure your smartphone or tablet is connected to the Wi-Fi network you want your air fryer to connect to.
6. Follow the on-screen instructions to connect your air fryer to the app.
7. You may need to enter your Wi-Fi network name (SSID) and Wi-Fi password to continue the setup process.
8. After inputting the required information, the app will attempt to connect your air fryer to the Wi-Fi network. Make sure your air fryer is within range of the Wi-Fi signal.
9. Once the connection is established, you'll receive a notification or see the device listed in the app as connected.
10. You can now control your Philips air fryer remotely using the app and access additional features such as recipes, time, temperature settings, and more.
Note: The specific steps might vary slightly depending on the model of your Philips air fryer, so refer to the user manual or instructions provided by Philips for detailed guidance.