Philips ESSENTIAL-AIRFRYER-HD920 user manual

There can be several reasons why your Philips Airfryer may not be working. Here are a few possible causes and solutions:
1. Power supply: Make sure the Airfryer is properly plugged into a working power outlet. Check the power cord for any damages. If it is plugged in correctly and still not working, try plugging in another appliance to the same outlet to see if it's a power supply issue.
2. Overloaded circuit: If there are multiple high-power appliances connected to the same circuit, it can cause an overload, resulting in the Airfryer not working. Try unplugging other appliances or using a different outlet on a separate circuit.
3. Timer and temperature settings: Make sure the timer is set correctly and the temperature is set to the desired level. The Airfryer will not start if the timer is set to 0 or if the temperature dial is turned off.
4. Faulty power button: Check if the power button is functioning properly. If it's stuck or not responding, it may need to be repaired or replaced. Contact Philips customer support for further assistance.
5. Safety lock issue: Some Airfryer models have a safety lock mechanism that prevents the appliance from starting if not properly locked. Ensure that the frying basket is securely locked into place before attempting to start the Airfryer.
If none of these solutions resolve the issue, it's recommended to contact Philips customer support or refer to the user manual for troubleshooting steps specific to your model.

There could be several reasons why your Philips air fryer may not be getting hot. Here are some possible causes and solutions:
1. Power supply issue: Ensure that the air fryer is properly plugged into a working power outlet and that the power cord is not damaged. If the power supply is stable and the fryer still doesn't heat up, then there might be an internal electrical problem. In such cases, it is recommended to contact Philips customer support or bring the appliance to an authorized service center.
2. Defective heating element: The heating element inside the air fryer may be faulty or damaged, preventing it from getting hot. A damaged heating element will require professional repairs or replacing. Reach out to Philips customer support for assistance.
3. Overheating protection: Philips air fryers come with built-in overheating protection, which may temporarily shut off the heating element if the appliance becomes too hot. If this happens, allow the fryer to cool down for some time before trying to use it again.
4. Timer or temperature settings: Make sure you have set the timer and temperature correctly. If the timer is set to zero or the temperature is set too low, the air fryer will not reach the desired heat. Adjust the settings accordingly.
5. Maintenance issues: Ensure that the air fryer is clean and free from any food debris. Accumulated dirt or residue can obstruct proper heat distribution. Clean the fryer according to the manufacturer's instructions.
If none of these solutions resolve the problem, it is advisable to contact Philips customer support or consult the user manual for further troubleshooting steps or possible repairs.