Pfaff 1050S user manual

To change the stitch on a Pfaff 1050s sewing machine, you can follow these steps:
1. Firstly, ensure that the machine is turned off and unplugged for safety purposes.
2. Locate the stitch selection dial on the front of the machine. This dial usually consists of a numbered design with various stitch options.
3. Gently turn the stitch selection dial to the desired stitch number or design. As you turn the dial, you should see the stitch pattern change on the machine.
4. Once you have selected the desired stitch, make sure the machine is set to the correct stitch width and length for your project. You can adjust these settings using the stitch width and length controls on the machine. The specifics of these controls may vary slightly depending on the model, so refer to your machine's manual if needed.
5. If your machine has a stitch display panel, it will show the selected stitch number or design, as well as any recommended settings for that stitch. Take note of any additional settings suggested by the machine.
6. Thread the machine with the desired thread color and type for your project, following the threading instructions provided in the machine's manual. Ensure that the thread is properly threaded through the machine's tension discs.
7. Place your fabric under the presser foot and lower the presser foot lever to hold the fabric in place.
8. Lastly, you can start sewing by either engaging the foot pedal or using the machine's start/stop button, depending on the specific features of your model.
Remember to always consult your sewing machine manual for specific instructions and features related to your Pfaff 1050s model, as the exact steps might vary slightly.

The Pfaff creative icon sewing and embroidery machine comes with the following:
1. Creative icon sewing and embroidery machine
. Embroidery unit and hoop
3. Presser feet (various types)
4. Bobbins
5. Needles
6. Thread spool caps
7. Thread net
8. Edge guide
9. Seam ripper
10. Brush and other cleaning tools
11. Screwdrivers
12. Multi-purpose tool
13. Spool discs
14. Spool holders
15. Lint brush
16. Knee lift
17. Foot control
18. Power cord
19. USB cable
0. Software CD
1. Instruction manual
2. Warranty information
Please note that the exact contents of the package may vary, and it's always best to refer to the manufacturer's website or contact the seller for the most accurate and up-to-date information.

To change the stitch length on a Pfaff 1050s sewing machine, follow these steps:
1. Turn on the sewing machine and select the desired stitch pattern using the stitch selection dial.
2. Locate the stitch length adjustment knob or lever. On the Pfaff 1050s, this is usually located on the front or side of the machine. It may have markings like "+/-" or numbers indicating stitch length.
3. Turn the knob clockwise or counterclockwise to increase or decrease the stitch length. Alternatively, if your machine has a lever instead of a knob, you may need to slide it up or down to adjust the stitch length.
4. Test the stitch on a scrap fabric to ensure it is set to the desired length. If necessary, make further adjustments until the stitch length is perfect for your needs.
Note: The Pfaff 1050s may have additional features like a stitch width adjustment, reverse stitching, or even an LCD display for stitch settings. Consult your sewing machine's manual for specific instructions on accessing and changing stitch length on your particular model.

The Pfaff Performance Icon sewing machine has 829 built-in stitches.