Optoma UHD60 user manual

To connect your remote to your Optoma UHD60 projector, follow these steps:
1. Insert the batteries into the remote control. Make sure to place them correctly, following the polarity markings.
2. Power on your Optoma projector using the power button located on the projector or via the remote control.
3. Aim the remote control directly at the front of the projector.
4. Press and hold the "Menu" and "Back" buttons simultaneously for about 3 seconds. This will activate the pairing mode on the remote.
5. While holding the "Menu" and "Back" buttons, the LED indicator on the remote control should start flashing.
6. Release the buttons when the LED indicator stops flashing and remains lit.
7. Now, the remote control should be successfully paired with your Optoma UHD60 projector. You can test it by pressing various buttons on the remote to control the projector's functions.
If the remote is not pairing or still not working, you may try replacing the batteries or contacting Optoma's customer support for further assistance.

The Optoma UHD60 has a contrast ratio of up to 1,000,000:1.

Yes, the Optoma UHD60 is a native 4K projector. It uses a DLP chip with a resolution of 3840 x 2160 pixels, which is considered true 4K.

The Optoma UHD60 has a resolution of 3840 x 2160 pixels, which is also known as 4K resolution.