One for All FERNBEDIENUNGEN user manual

To program a One For All universal remote without a code, you can follow these steps:
1. Turn on the device you want to program (e.g., TV, DVD player, cable/satellite box).
. Press and hold down the "Magic" or "Set" button on your One For All remote until the indicator light stays on.
3. Press the device button for the type of device you want to program (e.g., TV, DVD, AUX).
4. Aim the One For All remote at the device and simultaneously press and hold the "Power" and the digit "1" buttons, holding them down until the indicator light blinks twice.
5. Release both buttons and enter the following code: "9-9-1".
6. Press the "Power" button on the remote repeatedly while pointing it at the device, until the device turns off. Each time the Power button is pressed, the remote sends out a different manufacturer code.
7. Once the device turns off, press the "Magic" or "Set" button on the One For All remote to save the code. The indicator light will blink twice to confirm the code has been saved.
8. Test the remote by pressing the "Power" button to turn on the device. Also, try other functions like volume control, channel selection, etc. to ensure full functionality.
9. If the device does not respond or certain functions don't work properly, repeat steps 2-8 using a different code from the list provided with your One For All remote.
If you do not have a code list or the above steps do not work, consult the user manual or refer to the One For All website for more specific instructions for your remote model.

The "magic key" on a One For All remote refers to the Learning feature. This allows you to teach the remote commands from your original remote control that are not already pre-programmed into the One For All remote. By using the magic key, you can easily program your One For All remote to control devices that may not be included in the pre-programmed list.