NuWave OXYPURE user manual

1. Ensure the power cord is plugged into a functional electrical outlet.
. Press the "Power" button located on the front of the unit to turn off the air purifier.
3. Leave it off for a few minutes.
4. After waiting, press the "Power" button again to turn it on.
5. Navigate to the "Settings" by using the menu options on the front panel of the air purifier.
6. Use the navigation buttons to scroll down to find the "Reset" option.
7. Press "OK" or the corresponding selection button to select the "Reset" option.
8. Also reset the filter indicators if they are indicating to change the filters, you can do that by pressing the "Filter Reset" button located next to the corresponding filter indicator.
9. The device should now be reset and start working.
Please note that the exact process might vary slightly depending on your model. It's a good idea to check your user manual for specific instructions. If your Nuwave OxyPure is not working properly even after resetting, it is recommended to contact Nuwave's customer support for further troubleshooting.

The colors on the NuWave Oxypure air purifier indicate the quality of the air in the room. Here is what each color represents:
1. Blue: When the light is blue, it indicates that the air quality in the room is good. This means that the air is clean and free from pollutants.
2. Amber: The amber light indicates a moderate level of air pollution. It may suggest the presence of some contaminants or pollutants in the air, which may require the purifier to work at a higher speed.
3. Red: If the light turns red, it signifies poor air quality. This means that there is a high level of pollutants or contaminants in the room. The air purifier will automatically ramp up its speed to combat the pollution and purify the air faster.
By monitoring the color changes, you can have an idea of the air quality in your space and adjust the purifier's settings accordingly.

To reset the filter on your Nuwave Oxypure air purifier, follow these steps:
1. Make sure the unit is turned on.
2. Press and hold the "Filter" button on the control panel for 3-5 seconds. The display will show "Filter Reset."
3. Release the "Filter" button.
4. Press the "Power" button to turn off the unit.
5. Wait for a few seconds, then press the "Power" button again to turn the unit back on.
The filter reset process is now complete, and the air purifier will start fresh with the newly installed filter.

The NuWave OxyPure filters are designed to last approximately 12 to 18 months, depending on usage and environmental conditions. It is recommended to replace the filters within this timeframe to ensure optimal air purification performance.