Nokia ASHA-300 user manual

To charge your Nokia Asha 300, follow these steps:
1. Locate the charging port at the bottom of the phone.
. Take the charger that came with your Nokia Asha 300.
3. Connect the charger's smaller end into the charging port on your phone.
4. Plug the other end of the charger into any standard electrical outlet.
5. Once connected, you will see the battery icon on your phone's screen, indicating that it's charging.
6. Leave the phone connected to the charger until it reaches a full charge. It may take a couple of hours for the battery to fully charge.
7. Once fully charged, disconnect the charger from the phone by pulling it out gently.

Remember to use only the charger provided by Nokia or an approved compatible charger to avoid any damage to the device.

The Nokia Asha 300 was released in October 2011.

To connect your Nokia Asha 300 to the internet, you can follow these steps:
1. Ensure that you have an active mobile data plan or access to a Wi-Fi network.
2. On your phone, go to the main menu and select "Menu."
3. Scroll to "Settings" and select it.
4. Under "Settings," scroll to "Connectivity" or "Internet" and select it.
5. Select "Packet Data" (for mobile data) or "Wi-Fi" (for Wi-Fi network).
6. If you select "Packet Data," you may need to enter or confirm the internet settings provided by your mobile service provider. You can usually request these settings from your provider if they are not already configured on your phone.
7. If you select "Wi-Fi," your phone will scan for available Wi-Fi networks. Select the desired network and enter the password if necessary.
8. Once connected, your Nokia Asha 300 should now be able to access the internet.
Note: The steps provided above may vary slightly depending on the specific software version installed on your Nokia Asha 300.